Thanks for the fast respond. I'll downgrade to v19 and see how it work
I'll also try this method with the raidz2 option https://wiki.smartos.org/display/DOC/SmartOS+Clean+Re-install I'll let you know where that will bring me. thanks TDS Construction | Falica | Escouade TDS David Boudreau, BAA Directeur général, Groupe TDS 247, St-Georges, Thetford Mines (Québec) G6G 4S7 Tél. : 418 333-3333 € 1 855 222-2718 Téléc. : 418 335-1031 <http://www.gus.ca/> Avant d'imprimer, pensez à l'environnement! Avis : Ce message est confidentiel. Si vous n¹êtes pas le destinataire, veuillez informer l¹expéditeur par courriel immédiatement et effacer ce message et en détruire toute copie.Before printing, think about the Environment! Notice : This message is confidential. If you are not the addressee, please inform the sender by return e-mail immediately and delete this message and destroy all copies. Le 15-08-11 11:15 PM, « Robert Mustacchi » <[email protected]> a écrit : >On 8/11/15 19:59 , David Boudreau wrote: >> An IBM m1015 raid flashed to IT mode version 20 (I used the LSI SAS >>9211-8i firmware) > >In general, the version 20 firmware on the LSI SAS9211-8i has been noted >as being particularly problematic. No one has had a good experience with >it. I recommend you downgrade the firmware. > >> "Warning : Couldn't read ACPI SRAT table from BIOS. Lgrp support will >>be limited to one group." >> SunOS Release 5.11 Version joyent_20150723T072528Z 6 bit >> Copyright ...... >> Aug 11 22:45:40 svc.startd(8): system/filesystem/smartdc:default: >>Method "/lib/svc/method/fs-joyent" failed with exit status 95. >> Aug 11 22:45:40 svc.startd(8): system/filesystem/smartdc:default >>failed fatally:transitioned to maintenance (see 'svcs -xv' fo details) >> Requesting System Maintenance Mode >> (See /lib svc/share/README for more information.) >> Console login services(s) cannot run >> >> I need to had that it have still a non working FreeBSD installation on >>the hard drive. > > Here, I'd first boot to the noimport/noinstall option and use the zpool > command to import and then destroy your old ZFS pool from the FreeBSD > installation. That's likely throwing off initial setup. > > Robert > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
