On 11 December 2015 at 21:07, Tim Tang <[email protected]> wrote:
> We had installed latest SmartOS (20151210T194528Z) on SuperMicro
> SYS-F628R3-R72B+, added an PCIE extended 10G Ethernet Adapter (AOC-CTG-i2S
> => https://www.supermicro.com/products/accessories/addon/AOC-CTG-i2S.cfm).
>
> Unfortunately, the 10G ethernet adapter seems not working properly, following
> is the results:
>
> [root@0c-c4-7a-55-0c-30 ~]# dladm show-link
> LINK CLASS MTU STATE BRIDGE OVER
> igb0 phys 1500 up -- --
> igb1 phys 1500 up -- --
> ixgbe0 phys 1500 down -- --
> ixgbe1 phys 1500 down -- --
Do you see any log messages (/var/adm/messages, dmesg,
/var/log/syslog, etc) about the "ixgbe" driver at boot? It might be
helpful to dump out some driver state:
mdb -ke '::prtconf ! grep ixgbe' | awk '{printf("%s::print struct
dev_info devi_driver_data | ::print ixgbe_t\n", $1);}' | mdb -k
mdb -ke '::interrupts'
If you snoop on the interface do you see any frames? (e.g. "snoop -r
-d ixgbe0").
What kind of transceiver modules do you have installed in the cards?
Does the switch see the link come up, even though the system does not
seem to be working quite right?
Cheers.
--
Joshua M. Clulow
UNIX Admin/Developer
http://blog.sysmgr.org
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
