Thanks Keith. We upgraded the firmware to its latest but still no luck, so likely we'll give up.
BIOS Version : 6.17.04.0_4.16.08.00_0x06060A01 Ctrl-R Version : 5.04-0002 Preboot CLI Version: 01.07-05:#%0000 FW Version : 4.230.20-3532 NVDATA Version : 3.1403.00-0079 Boot Block Version : 3.02.00.00-0001 Jul 17 13:08:35 batfs0388 mr_sas: [ID 643100 kern.notice] io_timeout_checker: fw_outstanding 0x17 max_fw_cmds 0x39F Jul 17 13:08:38 batfs0388 mr_sas: [ID 347913 kern.warning] WARNING: mrsas_tbolt_reset_ppc: FW is in fault after OCR count 1 Retry Reset Jul 17 13:08:48 batfs0388 mr_sas: [ID 887724 kern.warning] WARNING: mrsas_tbolt_reset_ppc:resetadapter bit is set already check retry count 101 Jul 17 13:08:49 batfs0388 mr_sas: [ID 270009 kern.warning] WARNING: io_timeout_checker: FW Fault, calling reset adapter On Thu, Jul 17, 2014 at 1:01 PM, Keith Wesolowski < keith.wesolow...@joyent.com> wrote: > On Thu, Jul 17, 2014 at 11:59:16AM -0400, Youzhong Yang via > smartos-discuss wrote: > > > We ordered these Supermicro X9DRW-CF/CTF boxes which have ROMB LSI 3108 > on > > the motherboard and got stuck. We will probably add 9211-8i HBA cards to > > the machines and get them move forward. > > The 9207-8i is likely a better fit; it comes standard with IT firmware > vs IR in the 9211-8i. Both do work, however. SMCI makes a similar > board, the X9DRD-7LN4F-JBOD, which has the same 2308-IT on board as the > 9207-8i. I recommend using that instead of the X9DRW unless you're > wedded to the WIO form factor. > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
