There hopefully is a core file on your dump device.  You should see if you can 
coordinate sending that file to Joyent for analysis.  The core file will 
contain some sensitive information, so don’t post it publicly.  See `man 
coreadm` for more on dump devices and coredump settings in SmartOS.

Blake

> On Nov 27, 2014, at 12:17 PM, Len Weincier via smartos-discuss 
> <[email protected]> wrote:
> 
> Hi
> 
> We have a host with some decent supermicro kit that has spontaneously 
> rebooted twice in the last week under normal conditions. We see the following 
> in the logs :
> 
> 2014-11-22T01:43:09.000Z      c4a scsi: [ID 107833 kern.warning] WARNING: 
> /pci@0,0/pci8086,e08@3/pci15d9,400@0 (mpt_sas0):#012#011Disconnected command 
> timeout for target 19 w5000c50067158c6f.
> 2014-11-22T01:43:09.000Z      c4a scsi: [ID 107833 kern.notice] 
> /pci@0,0/pci8086,e08@3/pci15d9,400@0 (mpt_sas0):#012#011Timeout of 10 seconds 
> expired with 1 commands on target 19 lun 0.
> 2014-11-22T01:43:10.000Z      c4a scsi: [ID 243001 kern.warning] WARNING: 
> /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011mptsas_handle_event_sync: IOCStatus=0x8000, 
> IOCLogInfo=0x31170000
> 2014-11-22T01:43:13.000Z      c4a scsi: [ID 107833 kern.warning] WARNING: 
> /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011mptsas_check_task_mgt: Task 0x3 failed. IOCStatus=0x4a 
> IOCLogInfo=0x0 target=19#012
> 2014-11-22T01:43:13.000Z      c4a scsi: [ID 365881 kern.info 
> <http://kern.info/>] /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011Log info 0x31140000 received for target 19 
> w5000c50067158c6f.#012#011scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
> 2014-11-22T01:43:13.000Z      c4a scsi: [ID 107833 kern.warning] WARNING: 
> /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011mptsas_ioc_task_management failed try to reset ioc to 
> recovery!
> 2014-11-22T01:43:14.000Z      c4a scsi: [ID 365881 kern.info 
> <http://kern.info/>] /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011MPT Firmware version v16.0.1.0 (SAS2008)
> 2014-11-22T01:43:14.000Z      c4a scsi: [ID 365881 kern.info 
> <http://kern.info/>] /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011mpt0 MPI Version 0x200
> 2014-11-22T01:43:15.000Z      c4a scsi: [ID 365881 kern.info 
> <http://kern.info/>] /pci@0,0/pci8086,e08@3/pci15d9,400@0 
> (mpt_sas0):#012#011mpt0: IOC Operational.
> 
> The next entry in the logs is the machine starting up.
> 
> This happened again this morning. 
> 
> Any ideas on what might be happening ?
> 
> Thanks
> Len
> 
> smartos-discuss | Archives 
> <https://www.listbox.com/member/archive/184463/=now>  
> <https://www.listbox.com/member/archive/rss/184463/26679658-d7bb2457> | 
> Modify <https://www.listbox.com/member/?&;> Your Subscription   
> <http://www.listbox.com/>



-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription: 
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com

Reply via email to