Running SmartOS as VirtualBox guest under Linux Mint in my laptop. Under
SmartOS guest, configured Network Adapter1 as "Bridged Adapter" to have
smartos reach the internet and things are working as expected. But I wanted
to have local networking between vbox host (linux) and guest (smartos) even
when my PC is not connected to my internet gateway. Googled on this topic
and read various articles showing example between linux host & linux guest
but not between linux host & smartos guest (not even solaris/opensolaris).
Under SmartOS guest, tried configuring Network Adapter2 as "Host only
Adapter" and brought up a new interface in SmartOS for this purpose but
still I couldn't get it done!
Please have a look at my networking setup below:
[root@cloud4r ~]# uname -a
SunOS cloud4r 5.11 joyent_20141225T170427Z i86pc i386 i86pc
[root@cloud4r ~]# dladm show-phys -m
LINK SLOT ADDRESS INUSE CLIENT
e1000g0 primary 8:0:27:ad:1b:80 yes e1000g0
e1000g1 primary 8:0:27:71:ba:de yes e1000g1
[root@cloud4r ~]# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
e1000g0 Ethernet up 1000 full e1000g0
e1000g1 Ethernet up 1000 full e1000g1
[root@cloud4r ~]# dladm show-link
LINK CLASS MTU STATE BRIDGE OVER
e1000g0 phys 1500 up vmwarebr --
e1000g1 phys 1500 up -- --
vmwarebr0 bridge 1500 up -- e1000g0
external0 vnic 1500 up -- e1000g1
net0 vnic 1500 ? -- e1000g0
net0 vnic 1500 ? -- e1000g0
[root@cloud4r ~]# dladm show-ether
LINK PTYPE STATE AUTO SPEED-DUPLEX
PAUSE
e1000g0 current up yes 1G-f bi
e1000g1 current up yes 1G-f bi
[root@cloud4r ~]# dladm show-vnic
LINK OVER SPEED MACADDRESS MACADDRTYPE VID ZONE
external0 e1000g1 1000 2:8:20:67:1f:34 random 0 --
net0 e1000g0 0 92:a7:1e:94:29:83 fixed 0
d83c7e3b-edeb-47dc-ad53-da8f48b487db
net0 e1000g0 0 22:67:af:33:ff:3b fixed 0
5ffdaeb3-b03f-4858-a8b2-6d357b0b2c86
[root@cloud4r ~]# dladm show-bridge
BRIDGE PROTECT ADDRESS PRIORITY DESROOT
vmwarebr stp 32768/8:0:27:ad:1b:80 32768 32768/8:0:27:ad:1b:80
[root@cloud4r ~]# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,IPv4> mtu
1500 index 2
inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255
ether 8:0:27:ad:1b:80
external0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 3
inet 192.168.56.100 netmask ffffff00 broadcast 192.168.56.255
ether 2:8:20:67:1f:34
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
[root@cloud4r ~]# cat /usbkey/config
#
# This file was auto-generated and must be source-able by bash.
#
# admin_nic is the nic admin_ip will be connected to for headnode zones.
admin_nic=8:0:27:ad:1b:80
admin_ip=192.168.1.100
admin_netmask=255.255.255.0
admin_network=
admin_gateway=192.168.1.1
external_nic=8:0:27:71:ba:de
external_ip=192.168.56.100
external_netmask=255.255.255.0
external_network=
external_gateway=192.168.56.1
headnode_default_gateway=
dns_resolvers=8.8.8.8,8.8.4.4
dns_domain=
ntp_hosts=0.smartos.pool.ntp.org
compute_node_ntp_hosts=dhcp
[root@cloud4r ~]# ping 192.168.1.100
192.168.1.100 is alive
[root@cloud4r ~]# ping 192.168.56.100
192.168.56.100 is alive
[root@cloud4r ~]# ping 192.168.56.1
no answer from 192.168.56.1
>From linux, 192.168.1.100 is pingable but not 192.168.56.100
Additionally, I need to provide this external_nic to my zones inside
smartos so that zones can directly comminucate to linux host or vice versa.
Please let me know what else need to be configured. Thanks in advance.
Regards,
Ganapathy
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
