On 3/4/16 7:07 , Dirk Steinberg wrote: > Hi, > > does SmartOS run on the NUC6I3SYH? Has anyone tried? > It has an Intel Core i3-6100U CPU based on the Skylake > architecture.
There's someone who tried a NUC on the developer list, not sure if it's that one in particular. > From experience I know that newer Intel platforms tend > to have newer versions of their NIC chips as well and > sometimes there are not (yet) supported, but I do not > know what NIC part is in the box. The I219 is the phy that's shipping with the platform currently. > I saw that Robert is testing some new NIC drivers (I219) > so maybe this is what is needed. When will these be > integrated into SmartOS? At this time, there are some bugs and I don't have an I219 at this time. Some folks offered to help provide remote access so I could do some debugging, but I have no ETA at this time. > Does anyone know if the new NUCs (6th gen) will > support MTU 9000 jumbo frames for SDC fabric networking? According to the spec, it should. > On the older Broadwell NUCs (I218) I was unable to set > any MTU higher than 1500. I found that disappointing, > but maybe I did something wrong. The I218 in theory supports jumbo frames. We'll need to work out a bit more information about what went wrong. The best starting point is to get the output of dladm show-linkprop -p mtu on one of the e1000g's for the I218. Robert ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
