Hi, you have few options:
1) connect servers directly via crossover cable. For this you will need to check if you have a correct cable. Also, newer nics should handle this iirc. 2) ask your provider to configure switch port. I'd ask my provider to do it for me as that's the less hassle for you. Cheers, Adam > On 11 Apr 2016, at 14:49, tom my <[email protected]> wrote: > > Hi all, > > I have a production server (single) with 4 phys. NIC. located at provider and > connected only with one NIC. One of the VM is router with NAT (running > routerOS) with public IP from provider for all other VMs and GZ. Private > network is 10.1.1.0. > > I'd like to test our application / environment installed on few VMs, I got > external server for this purpose. A tricky part for me is that I'd like to > connect load-gen. server directly to GZ server to unused NIC. > Is there a way how to do it without another NAT? Somehow spread 10.1.1.0 > network over 2 physical servers. > Or shall I ask provider to just configure their switch properly and that > would be much easier way? > > Thanks a lot > .Tommy > smartos-discuss | Archives | Modify Your Subscription ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
