seems like i am a step further, disabling x2apic @ bios + disabling asy -> first impression is that it looks way better now, will update this after some testing
thanks for the asy hint, i dont think that i whould have found this! Am 15.04.2016 um 10:19 schrieb Dave Finster: > Right - well that triggered *something*. Perhaps remove the argument and > check intrstat. > > The issue I had with a similar board was that the asy driver on a particular > box caused a significant amount of interrupts to be generated which was > observable via intrstat. Disabling that driver sorted out my issue > temporarily (although bricked the serial ports) until I later discovered that > the issue was solved with a BIOS upgrade. > > - Dave > >> On 15 Apr 2016, at 6:15 PM, InterNetX - Juergen Gotteswinter >> <[email protected]> wrote: >> >> woops, crashes directly during boot with disabled asy >> >> http://abload.de/img/2016-04-1510_14_38-ja99qoh.png >> >> Am 15.04.2016 um 10:09 schrieb Dave Finster: >>> Hi Juergen >>> >>> By chance are there any ‘asy’ driver device attached? >>> >>> If so, try -Bdisable-asy=true as a boot argument and see if that clears it >>> up. >>> >>> - Dave >>> >>>> On 15 Apr 2016, at 6:03 PM, InterNetX - Juergen Gotteswinter >>>> <[email protected]> wrote: >>>> >>>> Hi, >>>> >>>> i am facing rather strange problem with an onboard Intel I350 NIC on a >>>> X10DRi Supermicro Board. A Short Test with an Linux Live Iso showed that >>>> in theory everything is fine, works right out of the Box. >>>> >>>> On SmartOS, everything looks fine, too: >>>> >>>> - Link shows up state with 1Gbit >>>> IP Configuration etc, everything flawless >>>> >>>> but >>>> >>>> except 1-2 times where incoming ICMP worked (dunno why, after next >>>> reboot it stopped) no in or outgoing Communication can be established. >>>> Next strange thing is, when looking via snoop -I igb4 it shows that i >>>> see (but imho way to less) other Machines Macs, Broadcasts, DNS. >>>> >>>> Tried so far: >>>> >>>> - disabled autoneg -> no effect >>>> tried several acpi bootloader settings -> no effect >>>> tried yesterdays latest platform -> same issue >>>> tried the same with an linux live iso -> works >>>> >>>> - disabled all green stuff @ bios (c-states etc) -> no effect >>>> >>>> the IPMI Interface got its own dedicated Interface, so imho its not an >>>> issue with shared onboard NIC. >>>> >>>> Anyone had something similar yet? >>>> >>>> Thanks >>>> >>>> Juergen >>>> >>> >>> >> >> > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
