Not 100% sure no. But in doubt...
I'll reboot first to make sure but if the controller was the issue, wouldn't I see the same errors on other disks ?
On Jul 19, 2016 13:11, Greg Treantos <[email protected]> wrote:
Are you sure the disk is bad? I see this on my system all the time, its something with my controller. I reboot and the error is gone..On Tue, Jul 19, 2016 at 5:46 AM, Antoine Jacoutot <[email protected]> wrote:Hi.
I have a disk in my pool that shows signs of failures.
---8<---------------------------------------------------------------------------
- dmesg extract
2016-07-19T09:22:38.825099+00:00 9c-8e-99-fc-12-b0 scsi: [ID 107833 kern.notice] /pci@0,0/pci8086,340f@8/pci1000,3020@0 (mpt_sas0):#012#011Timeout of 10 seconds expired with 1 commands on target 12 lun 0.
2016-07-19T09:22:38.825125+00:00 9c-8e-99-fc-12-b0 scsi: [ID 107833 kern.warning] WARNING: /pci@0,0/pci8086,340f@8/pci1000,3020@0 (mpt_sas0):#012#011Disconnected command timeout for target 12 w5000cca012b12465, enclosure 1
2016-07-19T09:22:38.976122+00:00 9c-8e-99-fc-12-b0 scsi: [ID 365881 kern.info] /pci@0,0/pci8086,340f@8/pci1000,3020@0 (mpt_sas0):#012#011Log info 0x31140000 received for target 12 w5000cca012b12465.#012#011scsi_status=0x0, ioc_status=0x8048, scsi_state=0xc
# uname -a
SunOS 9c-8e-99-fc-12-b0 5.11 joyent_20160504T205801Z i86pc i386 i86pc
# zpool status -v
pool: zones
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://illumos.org/msg/ZFS-8000-9P
scan: scrub repaired 0 in 14h9m with 0 errors on Thu Jul 7 04:43:36 2016
config:
NAME STATE READ WRITE CKSUM
zones ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c0t5000CCA012B1089Dd0 ONLINE 0 0 0
c1t5000CCA012AEAFC1d0 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
c2t5000CCA0124510DDd0 ONLINE 0 0 0
c3t5000CCA012A1FF61d0 ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
c4t5000CCA012B12465d0 ONLINE 0 0 1
c5t5000CCA012AEF71Dd0 ONLINE 0 0 0
mirror-3 ONLINE 0 0 0
c6t5000CCA01293E105d0 ONLINE 0 0 0
c7t5000CCA012AD8ED9d0 ONLINE 0 0 0
errors: No known data errors
---8<---------------------------------------------------------------------------
As you can see, my zones pool is configured as a striped mirror.
I would like to replace the faulty disk with a new one (exact same model).
This is what I am planning on doing:
# zpool offline c4t5000CCA012B12465d0
- shutdown the machine
- replace the drive
- boot
# zpool replace zones c4t5000CCA012B12465d0 <my-new-drive>
I've never done it before so I have 2 questions to ensure I am not doing
anything wrong or stupid here.
1. is what I proposed (offline+replace) correct?
2. the new drive will probably have another device name, won't it? If so, won't
I get into problem if I use the replace command with c4t5000CCA012B12465d0 which
will probably not exist anymore (since that disk got replaced)?
Thank you very much for any hint.
--
Antoine
http://www.listbox.com--
