On 7/08/16 2:46 am, Robert Mustacchi wrote:
On 8/6/16 1:36 , Ian Collins wrote:
On 25/07/16 11:33 am, Robert Mustacchi wrote:
On 7/22/16 17:13 , Ian Collins wrote:
On 07/19/16 03:02 AM, Robert Mustacchi wrote:
On 7/18/16 1:00 , Ian Collins wrote:
Hello,

I have a couple of systems with Supermicro X9 boards (X9SRH and X9DRH)
with dual embedded Intel X540 10GBase-T NICs and both only show the
link
speed as 1000 for ixgbe0.  I don't see this with a SmartOS system with
an X540 PCI card, or on a Solaris 11.3 X9DRH system.

# dladm show-linkprop ixgbe0
LINK         PROPERTY        PERM VALUE          DEFAULT POSSIBLE
ixgbe0       speed           r-   1000           1000           --

# dladm show-linkprop ixgbe1
LINK         PROPERTY        PERM VALUE          DEFAULT POSSIBLE
ixgbe1       speed           r-   10000          10000          --

Both systems showing a problem with ixgbe0 is too much of a
coincidence
for my liking.

All of the ports are connected to the same switch and swapping
ports and
cables makes no difference.

Has anyone else seen this?
I think this was an issue that was discovered by Dale Ghent as part of
his working in updating ixgbe for the X550 code base which hasn't
integrated.
Robert,

Is it worth trying your SmartOS preview platform images to see if this
issue has been addressed?
Probably can't hurt too much at this point. We'll want to be doing the
work on top of those change regardless. May be worth checking the
advertised / enabled link properties as well in addition to the speed
I just tried with joyent_20160806T000725Z and the systems showing this
problem still do.

The strange thing is the box that was running Solaris is now a CN and it
shows both links as 10G..

Hmm, okay. So what is the output of dladm show-linkprop on that device?
Also, can you grab the prtconf -d /dev/ixgbe<num> output for it?

dladm show-linkprop ixgbe0
LINK         PROPERTY        PERM VALUE          DEFAULT POSSIBLE
ixgbe0       speed           r-   1000           1000           --
ixgbe0       autopush        rw   --             --             --
ixgbe0       zone            rw   --             --             --
ixgbe0       duplex          r-   full           full half,full
ixgbe0       state           r-   up             up up,down
ixgbe0       adv_autoneg_cap rw   1              1              1,0
ixgbe0       mtu             rw   1500           1500 1500-15500
ixgbe0       flowctrl        rw   no             no no,tx,rx,bi
ixgbe0       adv_100gfdx_cap r-   --             0              1,0
ixgbe0       en_100gfdx_cap  --   --             0              1,0
ixgbe0       adv_40gfdx_cap  r-   --             0              1,0
ixgbe0       en_40gfdx_cap   --   --             0              1,0
ixgbe0       adv_10gfdx_cap  r-   1              1              1,0
ixgbe0       en_10gfdx_cap   rw   1              1              1,0
ixgbe0       adv_5000fdx_cap r-   --             0              1,0
ixgbe0       en_5000fdx_cap  --   --             0              1,0
ixgbe0       adv_2500fdx_cap r-   --             0              1,0
ixgbe0       en_2500fdx_cap  --   --             0              1,0
ixgbe0       adv_1000fdx_cap r-   1              1              1,0
ixgbe0       en_1000fdx_cap  rw   1              1              1,0
ixgbe0       adv_1000hdx_cap r-   --             0              1,0
ixgbe0       en_1000hdx_cap  --   --             0              1,0
ixgbe0       adv_100fdx_cap  r-   1              1              1,0
ixgbe0       en_100fdx_cap   rw   1              1              1,0
ixgbe0       adv_100hdx_cap  r-   --             0              1,0
ixgbe0       en_100hdx_cap   --   --             0              1,0
ixgbe0       adv_10fdx_cap   r-   --             0              1,0
ixgbe0       en_10fdx_cap    --   --             0              1,0
ixgbe0       adv_10hdx_cap   r-   --             0              1,0
ixgbe0       en_10hdx_cap    --   --             0              1,0
ixgbe0       maxbw           rw   --             --             --
ixgbe0       cpus            rw   --             --             --
ixgbe0       cpus-effective  r-   0,15-23        --             --
ixgbe0       pool            rw   --             --             --
ixgbe0       pool-effective  r-   --             --             --
ixgbe0       priority        rw   high           high low,medium,high
ixgbe0       tagmode         rw   vlanonly       vlanonly normal,vlanonly
ixgbe0       forward         rw   1              1              1,0
ixgbe0       default_tag     rw   1              1              --
ixgbe0       learn_limit     rw   1000           1000           --
ixgbe0       learn_decay     rw   200            200            --
ixgbe0       stp             rw   1              1              1,0
ixgbe0       stp_priority    rw   128            128            --
ixgbe0       stp_cost        rw   auto           auto           --
ixgbe0       stp_edge        rw   1              1              1,0
ixgbe0       stp_p2p         rw   auto           auto true,false,auto
ixgbe0       stp_mcheck      rw   0              0              1,0
ixgbe0       protection      rw   --             -- mac-nospoof,
restricted,
ip-nospoof,
dhcp-nospoof
ixgbe0       allowed-ips     rw   --             --             --
ixgbe0       allowed-dhcp-cids rw --             --             --
ixgbe0       rxrings         rw   --             -- sw,hw
ixgbe0       rxrings-effective r- 4              --             --
ixgbe0       txrings         rw   --             -- sw,hw,<1-7>
ixgbe0       txrings-effective r- 6              --             --
ixgbe0       txrings-available r- 7              --             --
ixgbe0       rxrings-available r- 0              --             --
ixgbe0       rxhwclnt-available r- 31            --             --
ixgbe0       txhwclnt-available r- 7             --             --



-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription: 
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com

Reply via email to