On 12/14/16 19:14 , Greg Treantos wrote: > I wanted to test opnsense and vyos under smartos. They both installed fine > but the performance is terrible throughput is 78Mb/s using iperf3 -b 0 from > a host on the lan side to a host on the wan side. Both are on 1Gb networks. > If I run iperf from inside vyos out to the lan I see 500Mb/s and from vyos > to the wan about 450Mb/s. However from the lan to vyos I see the 78Mb/s and > from Wan to vyos I see 60Mb/s. So the issue is with inbound requests. CPU > util on the VM is around 12% during the test. > > you can see the VM config here http://pastebin.com/nMfLDyRW . The system > hosting SmartOS is a Partaker mini computer with an Intel i5 processor and > Intel NICs. bare-metal vyos gets approx 925Mb/s and Opnsense (pfsense > clone) sees 725Mb/s. > > Can anyone help me with troubleshooting the issue?
It may be useful to go through this and look at the general resource usage of the system following the USE method. For example, have you allocated all the CPU, etc. that the guest needs. Perhaps also look at kvmstat to start getting a sense of what the system is doing. Robert ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
