Figured this out. It turned out to be an issue with one of my switches.
Turned off IGMP forwarding and the issue went away. I thought I this turned
off but obviously I didn't.

On Sat, Oct 28, 2017 at 1:56 PM, Greg Treantos <[email protected]> wrote:

> I figured out the update issue. needed to use vmadm udate <uuid>
> autoboot=false. It was in the man pages :-)
>
> On Sat, Oct 28, 2017 at 8:55 AM, Greg Treantos <[email protected]> wrote:
>
>> I decided to setup a couple of routers on my home SmartOS server. One is
>> the main house router and the other is a bridge router to my Verizon WAP.
>> The bridge is so I can get Verizon services like DVR control when I am away
>> from my house. This is well documented in the Verizon Forums.
>>
>> I have a single NIC that is VLAN'd via definitions for each VM. The VLANs
>> are 10 -  for the Verizon FIOS connection, 100 - for the main home LAN, 173
>> for the Fios connection between the bridge router and the Verizon WAP, and
>> 200 for an isolate guest lan.
>>
>> Router 1 is configured with 3 NICs, on vlans 10, 100, and 200. Router 2
>> is configured with 2 nics on vlan 100, and 173.
>>
>> I also have another dedicated minipc that is running Fedora 26 with a
>> similar setup. The only difference is VLAN 10 had a dedicated NIC. Vlans
>> 100, 173, and 200 are bridged through the same NIC.
>>
>> On the KVM Fedora box everything run fine. IE I can run both routers
>> without an issue. On SmartOS I can run only one of the routers at a time.
>> If I run both a loop occurs and the system crashes. I know the VLANs are
>> set up in the switches properly since I can run Router 1 on Fedora and
>> Router 2 on SmartOS and it works. Or I can run Router 1 on SmartOS and
>> Router 2 on Fedora and that works.
>>
>> Any idea why I would have a loop in SmartOS? The network json's for each
>> KVM instance is below..
>>
>> One more question. I am trying to set autoboot to false and I can't. I
>> use vmadm update <zoneid> autoboot:false and I get a confirmation that it
>> worked but the value stays true. How do I set this??
>>
>> Router 1
>>
>> "nics": [
>>     {
>>       "interface": "net0",
>>       "mac": "11:11:11:11:11:11",
>>       "vlan_id": 10,
>>       "nic_tag": "firewall",
>>       "ip": "dhcp",
>>       "ips": [
>>         "dhcp"
>>       ],
>>       "model": "virtio",
>>       "allow_dhcp_spoofing": true,
>>       "allow_ip_spoofing": true,
>>       "allow_mac_spoofing": true,
>>       "allow_restricted_traffic": true,
>>       "allow_unfiltered_promisc": true,
>>       "primary": true
>>     },
>>     {
>>       "interface": "net1",
>>       "mac": "42:50:0e:e8:c7:28",
>>       "vlan_id": 100,
>>       "nic_tag": "firewall",
>>       "netmask": "255.255.255.0",
>>       "ip": "192.168.1.254",
>>       "ips": [
>>         "192.168.1.254/24"
>>       ],
>>       "model": "virtio",
>>       "allow_dhcp_spoofing": true,
>>       "allow_ip_spoofing": true,
>>       "allow_mac_spoofing": true,
>>       "allow_restricted_traffic": true,
>>       "allow_unfiltered_promisc": true
>>     },
>>     {
>>       "interface": "net2",
>>       "mac": "f2:8d:d3:20:1c:20",
>>       "vlan_id": 200,
>>       "nic_tag": "firewall",
>>       "netmask": "255.255.255.224",
>>       "ip": "192.168.200.30",
>>       "ips": [
>>         "192.168.200.30/27"
>>       ],
>>       "model": "virtio",
>>       "allow_dhcp_spoofing": true,
>>       "allow_ip_spoofing": true,
>>       "allow_mac_spoofing": true,
>>       "allow_restricted_traffic": true,
>>       "allow_unfiltered_promisc": true
>>     }
>>
>> Router 2
>>
>> "nics": [
>>     {
>>       "interface": "net0",
>>       "mac": "d2:d3:ca:87:5d:a6",
>>       "vlan_id": 100,
>>       "nic_tag": "firewall",
>>       "ip": "dhcp",
>>       "ips": [
>>         "dhcp"
>>       ],
>>       "model": "virtio",
>>       "allow_dhcp_spoofing": true,
>>       "allow_ip_spoofing": true,
>>       "allow_mac_spoofing": true,
>>       "allow_restricted_traffic": true,
>>       "allow_unfiltered_promisc": true,
>>       "primary": true
>>     },
>>     {
>>       "interface": "net1",
>>       "mac": "72:7c:9d:dd:6e:a3",
>>       "vlan_id": 173,
>>       "nic_tag": "firewall",
>>       "netmask": "255.255.255.0",
>>       "ip": "173.48.255.1",
>>       "ips": [
>>         "173.48.255.1/24"
>>       ],
>>       "model": "virtio",
>>       "allow_dhcp_spoofing": true,
>>       "allow_ip_spoofing": true,
>>       "allow_mac_spoofing": true,
>>       "allow_restricted_traffic": true,
>>       "allow_unfiltered_promisc": true
>>     }
>>   ],
>>
>> --
>> Greg
>>
>> http://www.linkedin.com/in/gregtreantos
>>
>
>
>
> --
> Greg
>
> http://www.linkedin.com/in/gregtreantos
>



-- 
Greg

http://www.linkedin.com/in/gregtreantos



-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription: 
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com

Reply via email to