I can confirm that, HBA 330 works like a charm with SmartOS! ________________________________ Von: Ian Collins <[email protected]> Gesendet: Donnerstag, 25. Januar 2018 19:12:48 An: [email protected] Betreff: Re: [smartos-discuss] About PERC 330/730 in DELL Platforms
On 01/25/2018 05:01 PM, Tiraen wrote: > Good evening. > I must admit, a little surprised. Recently I came across the fact that > in the latest versions of the Dells T630/620 with PERC 330/730 stopped > working with SmartOS install > > And with any settings of the controller: > 1) passthrough > 2) JBOD > 3) etc > > And the situation is repeated even if, for example, to make the > initial installation from the image loaded through IDRAC > ~At the beginning of work with disks the dump from Attach > > I have about 60 hosts with different types of DELLS, But this behavior > I see for the first time > > The last time a multi-disk server was installed in November 2016 and > then 330 PERC worked fine in passthrough > > No one has encountered such a problem? I will be grateful for the answer Nothing that bad but I have found PERC controllers are a pain in the arse to deal with. In my case it was random lockups. We are replacing all PERC controllers with HBA330s (http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/dell-poweredge-hba330.pdf) which Dell sells for a surprisingly low price. I would recommend these for all new Dell systems. Cheers, Ian. ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
