Hi Jorge, Thanks for the info. I was able to include “addrconf” to the list of ips for my nic and got a v6 address from my upstream provider (I’m using a SmartOS zone as an IPv4 router for my enclave). If SmartOS supported PD, I could get a network allocation and then be able to assign routable v6 addresses to all of my clients. PD uses DHCP but it’s not strictly about configuring a given interface, so I can see the rationale why it isn’t supported.
Thinking out loud.. I wonder if LX zones use the illumos dhcpagent or the one typically used by the LX distro in use? Perhaps some more research is in order. Best, Bill > On Apr 5, 2018, at 3:23 PM, Jorge Schrauwen <sjorge...@blackdot.be> wrote: > > Hi Bill, > > There is some IPv6 support but Prefix Delegation is not amoung it AFAIK. > > the basics are ```ipadm create-addr -T addrconf net0/v6auto``` to grab SLAAC > address, static works by ```ipadm create-addr -T static -a > my:ad:dr:es:he:re/64 net/v6static``` > > I think the -T addrconf will also grab a stateful address but I do not run > DHCPv6 in my network. > > > > Regards > > > > Jorge > > > > > On 2018-04-05 20:49, H. William Welliver III wrote: > >> Hi all, >> >> I've got a project coming up and have been getting (back) up to speed with >> IPv6... My understanding is that the SmartOS/Illumos DHCP client does not >> support Prefix Delegation. Can anyone confirm that, or have I missed some >> nugget buried deep in the documentation? >> >> Thanks in advance! >> >> Bill >> smartos-discuss | Archives >> <https://www.listbox.com/member/archive/184463/=now> | Modify >> <https://www.listbox.com/member/?&;> Your Subscription <blocked.gif> >> <http://www.listbox.com/> ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
