Hi In my GZ I created an isolated etherstub: stub0
I have four VMs on stub0, one host acting as an IP router with addresses 192.168.11.1/24, 192.168.12.1/24 and 192.168.13.1/24 and three hosts using 192.168.11.2, 192.168.12.2 and 192.168.13.2 The three hosts all have gateways set to the corresponding IP on the router. On the router VM I have enabled ipv4-routing and ipv4 forwarding. root@rtr ~]# netstat -nr Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ---------- --------- 127.0.0.1 127.0.0.1 UH 2 0 lo0 192.168.11.0 192.168.11.1 U 3 1 net0 192.168.12.0 192.168.12.1 U 3 1 net1 192.168.13.0 192.168.13.1 U 3 75 net2 [root@host11 ~]# ipadm show-addr net0/_a ADDROBJ TYPE STATE ADDR net0/_a from-gz ok 192.168.11.2/24 [root@host11 ~]# cat /etc/defaultrouter 192.168.11.1 [root@host11 ~]# ping 192.168.11.1 192.168.11.1 is alive [root@host11 ~]# ping 192.168.12.1 no answer from 192.168.12.1 So I can ping the gateway IP but no further. I was under the impression that I just needed to enable routing(because the router doesn't have a default gateway set) and forwarding on the router VM. Like the subject states this may be a face-palm moment but what am I missing? Kevin Ratcliffe Sent from [ProtonMail](https://protonmail.ch) ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125 Powered by Listbox: http://www.listbox.com
