-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
moinmoin,
i was testing kernel 2.6.28 (installed from pkg-fso.alioth /
downloaded from dl.fso.org/stable/ms5 + modules)
and got some probs:
- - when starting with plugged in usb-net everything runs fine
- - when starting w/o usb-ned or with OM-charger i get the following
dmesg:
- --- snip ----
[ 0.000000] Linux version 2.6.28-20090105.git69b2aa26
(gi...@agricola) (gcc version 4.3.3 (Debian 4.3.3-3) ) #1 PREEMPT Tue
Feb 10 07:05:05 UTC 2009
[ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: GTA02
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c03e6e54,
node_mem_map c0913000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] CPU S3C2442B (id 0x32440aab)
[ 0.000000] S3C24XX Clocks, (c) 2004 Simtec Electronics
[ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz,
peripheral 50.000 MHz
[ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping
on. Total pages: 32512
[ 0.000000] Kernel command line: loglevel=0 rootfstype=ext2 root=/
dev/mmcblk0p2 rootdelay=5 mtdparts=physmap-flash:-(nor);neo1973-nand:
0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),
0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) ro
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] irq: clearing pending ext status 000b12f0
[ 0.000000] irq: clearing pending ext status 000902d0
[ 0.000000] irq: clearing subpending status 00000087
[ 0.000000] irq: clearing subpending status 00000082
[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[ 0.000000] timer tcon=00500000, tcnt a2c1, tcfg
00000200,00000000, usec 00001eb8
[21474536.485000] Console: colour dummy device 80x30
[21474536.485000] console [tty0] enabled
[21474536.485000] Lock dependency validator: Copyright (c) 2006 Red
Hat, Inc., Ingo Molnar
[21474536.485000] ... MAX_LOCKDEP_SUBCLASSES: 8
[21474536.485000] ... MAX_LOCK_DEPTH: 48
[21474536.485000] ... MAX_LOCKDEP_KEYS: 8191
[21474536.485000] ... CLASSHASH_SIZE: 4096
[21474536.485000] ... MAX_LOCKDEP_ENTRIES: 8192
[21474536.485000] ... MAX_LOCKDEP_CHAINS: 16384
[21474536.485000] ... CHAINHASH_SIZE: 8192
[21474536.485000] memory used by lock dependency info: 2527 kB
[21474536.485000] per task-struct memory footprint: 2304 bytes
[21474536.485000] Dentry cache hash table entries: 16384 (order: 4,
65536 bytes)
[21474536.485000] Inode-cache hash table entries: 8192 (order: 3,
32768 bytes)
[21474536.505000] Memory: 128MB = 128MB total
[21474536.505000] Memory: 120504KB available (3608K code, 5484K data,
156K init)
[21474536.510000] Calibrating delay loop... 198.65 BogoMIPS (lpj=496640)
[21474536.610000] Mount-cache hash table entries: 512
[21474536.615000] CPU: Testing write buffer coherency: ok
[21474536.630000] net_namespace: 816 bytes
[21474536.640000] regulator: core version 0.5
[21474536.645000] NET: Registered protocol family 16
[21474536.700000] S3C Power Management, Copyright 2004 Simtec
Electronics
[21474536.700000] wake enabled for irq 17
[21474536.700000] wake enabled for irq 49
[21474536.720000] S3C2442: Initialising architecture
[21474536.720000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec
Electronics
[21474536.720000] DMA channel 0 at c8808000, irq 33
[21474536.720000] DMA channel 1 at c8808040, irq 34
[21474536.720000] DMA channel 2 at c8808080, irq 35
[21474536.720000] DMA channel 3 at c88080c0, irq 36
[21474536.720000] S3C244X: Clock Support, DVS off
[21474536.880000] usbcore: registered new interface driver usbfs
[21474536.885000] usbcore: registered new interface driver hub
[21474536.885000] usbcore: registered new device driver usb
[21474536.950000] NET: Registered protocol family 2
[21474537.005000] IP route cache hash table entries: 1024 (order: 0,
4096 bytes)
[21474537.010000] TCP established hash table entries: 4096 (order: 3,
32768 bytes)
[21474537.015000] TCP bind hash table entries: 4096 (order: 5, 147456
bytes)
[21474537.015000] TCP: Hash tables configured (established 4096 bind
4096)
[21474537.015000] TCP reno registered
[21474537.030000] NET: Registered protocol family 1
[21474537.035000] s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered
[21474537.040000] Enabling FIQ using irq 29
[21474537.040000] not changing prescaler of PWM 3, since it's shared
with timer4 (clock tick)
[21474537.050000] gta02-pm-wlan gta02-pm-wlan.0: starting
[21474537.275000] ashmem: initialized
[21474537.280000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006
Red Hat, Inc.
[21474537.285000] msgmni has been set to 235
[21474537.295000] alg: No test for stdrng (krng)
[21474537.295000] alg: No test for stdrng (ansi_cprng)
[21474537.295000] io scheduler noop registered
[21474537.295000] io scheduler deadline registered (default)
[21474537.350000] ##### init_resume_dependency_list(head=c03d7cac)
[21474537.355000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000
(irq = 70) is a S3C2440
[21474537.355000] ##### init_resume_dependency_list(head=c03d7d88)
[21474537.355000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000
(irq = 73) is a S3C2440
[21474537.360000] ##### init_resume_dependency_list(head=c03d7e64)
[21474537.360000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000
(irq = 76) is a S3C2440
[21474537.435000] brd: module loaded
[21474537.435000] neo1973-version neo1973-version.0: starting
[21474537.460000] physmap platform flash device: 00200000 at 18000000
[21474537.465000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-
bit bank
[21474537.465000] Intel/Sharp Extended Query Table at 0x0039
[21474537.465000] Intel/Sharp Extended Query Table at 0x0039
[21474537.465000] Intel/Sharp Extended Query Table at 0x0039
[21474537.465000] Intel/Sharp Extended Query Table at 0x0039
[21474537.465000] Intel/Sharp Extended Query Table at 0x0039
[21474537.465000] cfi_cmdset_0001: Erase suspend on write enabled
[21474537.465000] erase region 0: offset=0x0,size=0x2000,blocks=8
[21474537.465000] erase region 1: offset=0x10000,size=0x10000,blocks=31
[21474537.465000] physmap-flash.0: 1 set(s) of 1 interleaved chips --
> 4 partitions of 512 KiB
[21474537.465000] RedBoot partition parsing not available
[21474537.480000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
[21474537.480000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3
30ns, Twrph1=2 20ns
[21474537.480000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa
(Samsung NAND 256MiB 1,8V 8-bit)
[21474537.485000] Bad block table found at page 131008, version 0x01
[21474537.485000] Bad block table found at page 130944, version 0x01
[21474537.485000] nand_read_bbt: Bad block at 0x02440000
[21474537.485000] nand_read_bbt: Bad block at 0x03ec0000
[21474537.485000] nand_read_bbt: Bad block at 0x0d7e0000
[21474537.485000] 6 cmdlinepart partitions found on MTD device
neo1973-nand
[21474537.485000] Creating 6 MTD partitions on "neo1973-nand":
[21474537.485000] 0x00000000-0x00040000 : "u-boot"
[21474537.495000] 0x00040000-0x00080000 : "u-boot_env"
[21474537.505000] 0x00080000-0x00880000 : "kernel"
[21474537.510000] 0x00880000-0x00920000 : "splash"
[21474537.520000] 0x00920000-0x00960000 : "factory"
[21474537.530000] 0x00960000-0x10000000 : "rootfs"
[21474537.555000] usbcore: registered new interface driver libusual
[21474537.565000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440:
increasing FIFO to 128 bytes
[21474537.565000] gta02_udc_command S3C2410_UDC_P_DISABLE
[21474537.570000] mice: PS/2 mouse device common for all mice
[21474537.585000] i2c /dev entries driver
[21474537.590000] s3c2440-i2c s3c2440-i2c: slave address 0x10
[21474537.595000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
[21474537.620000] pcf50633 0-0073: Probed device version 19 variant 132
[21474537.670000] input: GTA02 PMU events as /class/input/input0
[21474537.715000] pcf50633-rtc pcf50633-rtc: rtc core: registered
pcf50633 as rtc0
[21474537.745000] wake enabled for irq 53
[21474537.750000] s3c2440-ts s3c2440-ts: Starting
[21474537.750000] Created group ts filter len 12 depth 2 close 10
thresh 6
[21474537.750000] Created Median ts filter len 20 depth 2 dec 24
[21474537.750000] Created Mean ts filter len 4 depth 2 thresh 65535
[21474537.750000] Created Linear ts filter depth 2
[21474537.750000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized
[21474537.750000] s3c2440-ts s3c2440-ts: successfully loaded
[21474537.755000] input: s3c2410 TouchScreen as /class/input/input1
[21474537.770000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00
INT4=0x40 INT5=0x00
[21474537.780000] neo1973-pm-host neo1973-pm-host.0: starting
[21474537.785000] input: lis302-1 (top) as /class/input/input2
[21474537.790000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474537.810000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474537.810000] lis302dl lis302dl.1: Found lis302-1 (top)
[21474537.815000] input: lis302-2 (bottom) as /class/input/input3
[21474537.835000] lis302dl lis302dl.2: Found lis302-2 (bottom)
[21474537.840000] input: Neo1973 Buttons as /class/input/input4
[21474537.875000] wake enabled for irq 48
[21474537.880000] neo1973-resume neo1973-resume.0: starting
[21474537.885000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
[21474537.900000] APM Battery Driver
[21474537.905000] bq27000-battery bq27000-battery.0: BQ27000 Battery
Driver (C) 2008 Openmoko, Inc
[21474537.945000] cpuidle: using governor ladder
[21474537.945000] sdhci: Secure Digital Host Controller Interface driver
[21474537.945000] sdhci: Copyright(c) Pierre Ossman
[21474537.955000] s3c2440-sdi s3c2440-sdi: host detect has no irq
available
[21474537.955000] mapped channel 0 to 0
[21474537.960000] s3c2440-sdi s3c2440-sdi: powered down.
[21474537.960000] s3c2440-sdi s3c2440-sdi: initialisation done.
[21474537.960000] HIFInit
[21474537.970000] Registered led device: neo1973:vibrator
[21474537.970000] Registered led device: gta02-power:orange
[21474537.975000] Registered led device: gta02-power:blue
[21474537.975000] Registered led device: gta02-aux:red
[21474538.025000] usbcore: registered new interface driver usbhid
[21474538.025000] usbhid: v2.6:USB HID core driver
[21474538.040000] logger: created 64K log 'log_main'
[21474538.040000] logger: created 256K log 'log_events'
[21474538.045000] logger: created 64K log 'log_radio'
[21474538.055000] regulator: auto: 3300 mV normal
[21474538.055000] regulator: down1: 1300 <--> 1600 mV normal
[21474538.070000] regulator: down2: 1800 mV normal
[21474538.070000] regulator: ldo1: 3300 <--> 1300 mV normal
[21474538.085000] regulator: ldo2: 3300 mV normal
[21474538.095000] regulator: ldo3: 3000 mV normal
[21474538.105000] regulator: ldo4: 3200 mV normal
[21474538.110000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973
Bluetooth Power Management: starting
[21474538.120000] neo1973-pm-bt neo1973-pm-bt.0:
__gta02_pm_bt_toggle_radio 1
[21474538.160000] regulator: ldo5: 3000 mV normal
[21474538.165000] neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS
Power Management:starting
[21474538.170000] s3c2440-sdi s3c2440-sdi: running at 0kHz
(requested: 0kHz).
[21474538.170000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474538.170000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474538.175000] regulator: ldo6: 3000 mV normal
[21474538.175000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474538.180000] regulator: hcldo: 2000 <--> 3300 mV normal
[21474538.180000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474538.200000] Detected S-Media IRQ# pullup, enabling interrupt
[21474538.200000] glamo3362 glamo3362.0: Glamo interrupt registered
[21474538.200000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474538.210000] mmc0: queuing CIS tuple 0x01 length 3
[21474538.230000] mmc0: queuing CIS tuple 0x1a length 5
[21474538.235000] mmc0: queuing CIS tuple 0x1b length 8
[21474538.240000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz,
PLL2: 89980928Hz
[21474538.240000] s3c2440-sdi s3c2440-sdi: running at 25000kHz
(requested: 25000kHz).
[21474538.240000] s3c2440-sdi s3c2440-sdi: running at 25000kHz
(requested: 25000kHz).
[21474538.245000] mmc0: queuing CIS tuple 0x80 length 1
[21474538.245000] mmc0: queuing CIS tuple 0x81 length 1
[21474538.245000] mmc0: queuing CIS tuple 0x82 length 1
[21474538.245000] mmc0: new SDIO card at address 0001
[21474538.300000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko,
Inc.
[21474538.360000] glamo-fb glamo-fb.0: spin_lock_init
[21474538.545000] fbcon_event_notify action=5, data=c781fac0
[21474538.645000] Console: switching to colour frame buffer device 80x58
[21474538.710000] fb0: SMedia Glamo frame buffer device
[21474539.085000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[21474539.135000] AR6000 Reg Code = 0x40000060
[21474539.205000] glamo-spi-gpio glamo-spi-gpio.0: registering
c03bf63c: jbt6k74
[21474539.595000] Corgi Backlight Driver Initialized.
[21474539.595000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007
Openmoko, Inc
[21474539.595000] glamo-mci glamo-mci.0: probe: mapped
mci_base:c88a2400 irq:0.
[21474539.600000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
[21474539.600000] glamo-mci glamo-mci.0: initialisation done.
[21474539.600000] regulator: memldo: 1800 mV normal
[21474539.620000] TCP cubic registered
[21474539.620000] NET: Registered protocol family 17
[21474539.620000] Bridge firewalling registered
[21474539.645000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz
div=255 (req: 0kHz). Bus width=0
[21474539.655000] pcf50633-rtc pcf50633-rtc: setting system clock to
2009-02-10 21:36:06 UTC (1234301766)
[21474539.655000] Waiting 5sec before mounting root device...
[21474539.665000] SD power -> 3200mV
[21474539.665000] glamo-mci glamo-mci.0: powered (vdd = 20) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.665000] glamo-mci glamo-mci.0: powered (vdd = 20) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.670000] glamo-mci glamo-mci.0: powered (vdd = 20) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.670000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474539.670000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474539.670000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
[21474539.670000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[21474539.680000] SD power -> 2700mV
[21474539.680000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.680000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.680000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.785000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.795000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
195kHz div=255 (req: 195kHz). Bus width=0
[21474539.795000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
16666kHz div=2 (req: 16666kHz). Bus width=0
[21474539.795000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
16666kHz div=2 (req: 16666kHz). Bus width=2
[21474539.795000] mmc1: new high speed SDHC card at address d555
[21474539.795000] mmcblk0: mmc1:d555 SU08G 3.60 GiB
[21474539.800000] mmcblk0: p1 p2
[21474539.825000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00
INT4=0x40 INT5=0x00
[21474539.845000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474539.865000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474540.975000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x40
INT4=0x00 INT5=0x00
[21474540.995000] pcf50633 0-0073: adc result = 6
[21474541.035000] pcf50633 0-0073: usb curlim to 1000 mA
[21474541.105000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474541.125000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474544.680000] VFS: Mounted root (ext2 filesystem) readonly.
[21474544.680000] Freeing init memory: 156K
[21474569.235000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[21474569.235000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
[21474569.255000] s3c2410-ohci s3c2410-ohci: new USB bus registered,
assigned bus number 1
[21474569.255000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
[21474569.315000] usb usb1: configuration #1 chosen from 1 choice
[21474569.320000] hub 1-0:1.0: USB hub found
[21474569.320000] hub 1-0:1.0: 2 ports detected
[21474569.360000] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[21474569.360000] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[21474569.360000] usb usb1: Product: S3C24XX OHCI
[21474569.360000] usb usb1: Manufacturer: Linux
2.6.28-20090105.git69b2aa26 ohci_hcd
[21474569.360000] usb usb1: SerialNumber: s3c24xx
[21474569.690000] usb 1-1: new full speed USB device using s3c2410-
ohci and address 2
[21474569.950000] usb 1-1: configuration #1 chosen from 1 choice
[21474569.975000] usb 1-1: New USB device found, idVendor=0a12,
idProduct=0001
[21474569.975000] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[21474570.725000] Bluetooth: Core ver 2.13
[21474570.735000] NET: Registered protocol family 31
[21474570.735000] Bluetooth: HCI device and connection manager
initialized
[21474570.735000] Bluetooth: HCI socket layer initialized
[21474570.825000] Bluetooth: Generic Bluetooth USB driver ver 0.3
[21474570.850000] usbcore: registered new interface driver btusb
[21474580.155000] usbcore: registered new interface driver cdc_ether
[21474580.465000] usb0: MAC 00:1f:11:01:04:bc
[21474580.465000] usb0: HOST MAC 32:88:11:59:8c:e5
[21474580.465000] g_ether gadget: Ethernet Gadget, version: Memorial
Day 2008
[21474580.465000] g_ether gadget: g_ether ready
[21474580.465000] gta02_udc_command S3C2410_UDC_P_ENABLE
[21474581.775000] NET: Registered protocol family 10
[21474584.360000] ASoC version 0.13.2
[21474584.755000] WM8753 Audio Codec 0.16
[21474584.770000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
[21474584.775000] asoc: WM8753 Voice <-> Bluetooth mapping ok
[21474589.690000] Adding 131064k swap on /swapfile. Priority:-1
extents:43 across:134896k
[21474595.135000] ADDRCONF(NETDEV_UP): usb0: link is not ready
[21474644.370000] Bluetooth: L2CAP ver 2.11
[21474644.370000] Bluetooth: L2CAP socket layer initialized
[21474645.085000] Bluetooth: RFCOMM socket layer initialized
[21474645.085000] Bluetooth: RFCOMM TTY layer initialized
[21474645.085000] Bluetooth: RFCOMM ver 1.10
[21474648.800000] glamo-mci glamo-mci.0: command timeout, continuing
[21474662.840000] channel hint set to 2412
[21474662.850000] AR6000 disconnected
[21474662.910000] AR6000 connected event on freq 2412 with bssid
00:14:51:73:52:6d listenInterval=100, beaconInterval = 100,
beaconIeLen = 26 assocReqLen=52 assocRespLen =22
[21474662.910000] Network: Infrastructure
[21474663.625000] channel hint set to 2412
[21474663.635000] AR6000 disconnected from 00:14:51:73:52:6d
[21474663.670000] AR6000 connected event on freq 2412 with bssid
00:14:51:73:52:6d listenInterval=100, beaconInterval = 100,
beaconIeLen = 26 assocReqLen=52 assocRespLen =22
[21474663.670000] Network: Infrastructure
[21474665.425000] fbcon_event_notify action=1, data=c6cbfdc8
[21474668.660000] eth0: no IPv6 routers present
[21474723.820000] neo1973-pm-bt neo1973-pm-bt.0:
__gta02_pm_bt_toggle_radio 0
[21474723.850000] usb 1-1: USB disconnect, address 2
[21474723.850000] btusb_intr_complete: hci0 urb c6d453e0 failed to
resubmit (19)
[21474723.910000] btusb_send_frame: hci0 urb c6d453e0 submission failed
[21474723.935000] neo1973-pm-bt neo1973-pm-bt.0:
__gta02_pm_bt_toggle_radio 0
[21474726.095000] debug_hdr_ptr: 0x800018b0
[21474726.100000] AR6000 disconnected from 00:14:51:73:52:6d
[21474742.245000] ar6000_wow interrupt
[21474742.700000] Unable to handle kernel NULL pointer dereference at
virtual address 00000126
[21474742.700000] pgd = c6f98000
[21474742.700000] [00000126] *pgd=36c27031, *pte=00000000,
*ppte=00000000
[21474742.700000] Internal error: Oops: 17 [#1] PREEMPT
[21474742.700000] Modules linked in: rfcomm l2cap
snd_soc_neo1973_gta02_wm8753 snd_soc_s3c24xx_i2s snd_soc_s3c24xx
snd_soc_wm8753 snd_soc_core snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd_page_alloc snd ipv6 g_ether cdc_ether btusb bluetooth
ohci_hcd
[21474742.700000] CPU: 0 Not tainted (2.6.28-20090105.git69b2aa26
#1)
[21474742.700000] PC is at wmi_get_power_mode_cmd+0xc/0x14
[21474742.700000] LR is at ar6000_ioctl_giwpower+0x14/0x18
[21474742.700000] pc : [<c0234af8>] lr : [<c022e9f8>] psr:
20000013
[21474742.700000] sp : c6ee9d98 ip : c6ee9da8 fp : c6ee9da4
[21474742.700000] r10: 00008b2d r9 : c79f6000 r8 : 00000001
[21474742.700000] r7 : 03cb9c40 r6 : c0300098 r5 : c6ee9e88 r4 :
00008b2d
[21474742.700000] r3 : 00000000 r2 : c6ee9e88 r1 : c6ee9e2c r0 :
00000000
[21474742.700000] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA
ARM Segment user
[21474742.700000] Control: c000717f Table: 36f98000 DAC: 00000015
[21474742.700000] Process iwconfig (pid: 1861, stack limit = 0xc6ee8268)
[21474742.700000] Stack: (0xc6ee9d98 to 0xc6eea000)
[21474742.700000]
9d80: c6ee9db4
c6ee9da8
[21474742.700000] 9da0: c022e9f8 c0234afc c6ee9e1c c6ee9db8 c02d803c
c022e9f4 c6ee9e2c c6ee9dc8
[21474742.700000] 9dc0: c026ff10 c03e1ec4 c03e19d4 22222222 22222222
22222222 22222222 22222222
[21474742.700000] 9de0: c6ee9e04 00008b2d 00000000 c79f6000 c6ee9e1c
00008b2d c6ee9e78 c090e6e4
[21474742.700000] 9e00: 03cb9c40 00000001 c6ee8000 03cb9c40 c6ee9e54
c6ee9e20 c02d7b98 c02d7fdc
[21474742.700000] 9e20: c022e9e4 c0181580 c6ed62c0 00008b2d c6ee9efc
00000000 00008b2d c6ee9e78
[21474742.700000] 9e40: c090e6e4 00000000 c6ee9ecc c6ee9e58 c0267b24
c02d7aec 40037f3c c6ed62f8
[21474742.700000] 9e60: c6ee9e84 c6ee9e70 c02decc0 c00442e4 c6ed62f4
c6ed62f8 30687465 00000000
[21474742.700000] 9e80: 00000000 00000000 0337f980 00000002 00000038
03cb9e18 c6ee9ebc c6ee9ea8
[21474742.700000] 9ea0: c0062fc4 c6f7c2e0 00008b2d 03cb9c40 c6f7c2e0
c0030024 c6ee8000 03cb9c40
[21474742.700000] 9ec0: c6ee9eec c6ee9ed0 c02573bc c0267480 c006906c
c6f7c2e0 03cb9c40 00008b2d
[21474742.700000] 9ee0: c6ee9f0c c6ee9ef0 c00b13d4 c02571ac c6ee9fac
c764a088 c6f7c2e0 00008b2d
[21474742.700000] 9f00: c6ee9f7c c6ee9f10 c00b19c8 c00b13a8 c0030024
c6f22de4 c6ee9f3c c6ee9f28
[21474742.700000] 9f20: c02ded10 c00442e4 00000002 c6f22dc0 c6ee9f5c
c6ee9f40 c00a2b1c c02decec
[21474742.700000] 9f40: 00000000 00000002 c764a040 00000119 c6ee9f84
00000002 03cb9c40 00008b2d
[21474742.700000] 9f60: c6f7c2e0 c0030024 c6ee8000 03cb9934 c6ee9fa4
c6ee9f80 c00b1a60 c00b154c
[21474742.700000] 9f80: ffffffff 00000000 03cb9c40 03cb9eff 00000002
00000036 00000000 c6ee9fa8
[21474742.700000] 9fa0: c002fea0 c00b1a30 03cb9c40 03cb9eff 00000002
00008b2d 03cb9c40 03cb9c4f
[21474742.700000] 9fc0: 03cb9c40 03cb9eff 00000002 00000036 03cb9e14
00000000 03cb9934 00000000
[21474742.700000] 9fe0: 03cb97c8 03cb97b8 0000ac10 401abfbc 60000010
00000002 00000000 00000000
[21474742.700000] Backtrace:
[21474742.700000] [<c0234aec>] (wmi_get_power_mode_cmd+0x0/0x14) from
[<c022e9f8>] (ar6000_ioctl_giwpower+0x14/0x18)
[21474742.700000] [<c022e9e4>] (ar6000_ioctl_giwpower+0x0/0x18) from
[<c02d803c>] (ioctl_standard_call+0x70/0x3c4)
[21474742.700000] [<c02d7fcc>] (ioctl_standard_call+0x0/0x3c4) from
[<c02d7b98>] (wext_handle_ioctl+0xbc/0x224)
[21474742.700000] [<c02d7adc>] (wext_handle_ioctl+0x0/0x224) from
[<c0267b24>] (dev_ioctl+0x6b4/0x71c)
[21474742.700000] r8:00000000 r7:c090e6e4 r6:c6ee9e78 r5:00008b2d
r4:00000000
[21474742.700000] [<c0267470>] (dev_ioctl+0x0/0x71c) from
[<c02573bc>] (sock_ioctl+0x220/0x260)
[21474742.700000] [<c025719c>] (sock_ioctl+0x0/0x260) from
[<c00b13d4>] (vfs_ioctl+0x3c/0x9c)
[21474742.700000] r6:00008b2d r5:03cb9c40 r4:c6f7c2e0
[21474742.700000] [<c00b1398>] (vfs_ioctl+0x0/0x9c) from [<c00b19c8>]
(do_vfs_ioctl+0x48c/0x4e4)
[21474742.700000] r6:00008b2d r5:c6f7c2e0 r4:c764a088
[21474742.700000] [<c00b153c>] (do_vfs_ioctl+0x0/0x4e4) from
[<c00b1a60>] (sys_ioctl+0x40/0x60)
[21474742.700000] [<c00b1a20>] (sys_ioctl+0x0/0x60) from [<c002fea0>]
(ret_fast_syscall+0x0/0x2c)
[21474742.700000] r7:00000036 r6:00000002 r5:03cb9eff r4:03cb9c40
[21474742.700000] Code: c02fc634 e1a0c00d e92dd800 e24cb004 (e5d00126)
[21474742.705000] ---[ end trace ad8cd22f967e0598 ]---
[21474804.700000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x02
INT4=0x00 INT5=0x00
[21474804.790000] pcf50633 0-0073: INT1=0x08 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474804.810000] pcf50633 0-0073: usb curlim to 0 mA
[21474804.925000] pcf50633 0-0073: INT1=0x80 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474804.980000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474806.330000] pcf50633 0-0073: INT1=0x84 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474806.405000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474806.435000] pcf50633 0-0073: INT1=0x00 INT2=0x00 INT3=0x00
INT4=0x00 INT5=0x00
[21474806.565000] g_ether gadget: full speed config #1: CDC Ethernet
(ECM)
- --- snap ----
other problem:
- frameworkd does not react (thus started, i get timeouts when i
try to start opp)
oddity:
- /dev/input/eventX does not longer (as it did in 2.6.24) emit
events on insert/removal of usb
regards,
christian (morlac) adams
- --
- -----BEGIN CONTACT BLOCK-----
eMail: mor...@morlac.de
Jabber: mor...@skavaer.homelinux.org
- ------END CONTACT BLOCK------
- -----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS$/IT;d-;s:;a?;C++(+++)>++++;UL++++;P++(+++)>++++;
L++(+++);E---;W++;N(+);o?;K?;!w;!O;!M+>;!V;PS(+);PE;
Y+;PGP++;t+(++);5(+)>++;X(+);R*;tv->+;b++(+++);DI++;
D++(+++)>++++;G(+)>++;e+>+++;h-()>++;r++;y++;
- ------END GEEK CODE BLOCK------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)
iD8DBQFJkhQIr81gVylJyzERAm2QAJsGX18MjM5KhQeafpAWpMYuJKI88gCgnEdy
oClKPQ5FeFViI5yVul1bchI=
=iOE/
-----END PGP SIGNATURE-----
_______________________________________________
Smartphones-userland mailing list
Smartphones-userland@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland
