Hi Steven, I ran into the same. I just don't know why. I repaired it by changing from fbdev to glamo in /etc/xorg.conf (see http://wiki.debian.org/DebianOnFreeRunner) Please also apt-get install xserver-xorg-video-glamo.
I am CCing the experts list. You may have ran into an issue with the installer. My hunch is that it has something to do with the nodm setup....just a hunch. Steffen Steven Jones wrote: > I put the output below. I am not sure how to answer the questions; I am > pretty far outside my area of expertise, so thank you for the help. > I re-ran the install script, did not call any tasks, and now the aux > button brings up a keyboard, and the power button brings up a window > with buttons to turn on Bluetooth, WiFi, GPS, Shutdown, Suspend, Reboot, > Lock Screen, and Close. > Additionally, when the screen gets dim, I can press the screen and it > gets bright again. Otherwise, it does not respond to inputs if I press a > button. (This is better than it was) > > Johannes Schauer wrote: > heya! > > is touchscreen support modular? > > lsmod | grep s3c2410_ts > or > modprobe s3c2410_ts > > >> lsmod | grep s3c2410_ts returns nothing >> modprobe s3c2410_ts returns: >> FATAL: Module s3c2410_ts not found. > do you have the proper devices? > > ls /dev/input/event* > >> ls /dev/input returns: >> by-path event0 event 1 event2 event3 event4 mice touchscreen0 > or > apt-get input-utils > lsinput > >> apt-get install input-utils >> lsinput returns: >> /dev/input/event0 bustype : >> BUS_I2C vendor : >> 0x0 product : >> 0x0 version : >> 0 name : "GTA02 PMU >> events" bits ev : EV_SYN EV_KEY >> EV_PWR >> /dev/input/event1 >> bustype : BUS_RS232 >> vendor : 0xdead product : 0xbeef version : 257 name : >> "s3c2410 TouchScreen" >> bits ev : EV_SYN EV_KEY EV_ABS > >> /dev/input/event2 >> bustype : BUS_I2C >> vendor : 0x0 product : 0x0 version : 0 name : >> "lis302-1 (top)" >> bits ev : EV_SYN EV_REL >> /dev/input/event3 >> bustype : BUS_I2C >> vendor : 0x0 >> product : 0x0 >> version : 0 >> name : "lis302-2 (bottom)" >> bits ev : EV_SYN EV_REL > >> /dev/input/event4 >> bustype : BUS_HOST >> vendor : 0x1 >> product : 0x1 >> version : 256 >> name : "Neo1973 Buttons" >> phys : "neo1973kbd/input0" >> bits ev : EV_SYN EV_KEY EV_SW > > > or > cat /proc/bus/input/devices > >> returns: > >> I: Bus=0018 Vendor=0000 Product=0000 Version=0000 N: Name="GTA02 >> PMU events" P: >> Phys= S: >> Sysfs=/class/input/input0 U: >> Uniq= H: Handlers=kbd >> event0 B: >> EV=400003 B: KEY=10 0 0 0 0 0 >> 0 0 100000 0 0 0 >> I: Bus=0013 >> Vendor=dead Product=beef Version=0101 >> N: Name="s3c2410 TouchScreen" >> P: Phys= >> S: Sysfs=/class/input/input1 >> U: Uniq= >> H: Handlers=event1 >> B: EV=b >> B: KEY=400 0 0 0 0 0 0 0 0 0 0 >> B: ABS=1000003 > >> I: Bus=0018 Vendor=0000 Product=0000 Version=0000 >> N: Name="lis302-1 (top)" >> P: Phys= >> S: Sysfs=/class/input/input2 >> U: Uniq= >> H: Handlers=event2 >> B: EV=5 >> B: REL=7 > >> I: Bus=0018 Vendor=0000 Product=0000 Version=0000 >> N: Name="lis302-2 (bottom)" >> P: Phys= >> S: Sysfs=/class/input/input3 >> U: Uniq= >> H: Handlers=event3 >> B: EV=5 >> B: REL=7 > >> I: Bus=0019 Vendor=0001 Product=0001 Version=0100 >> N: Name="Neo1973 Buttons" >> P: Phys=neo1973kbd/input0 >> S: Sysfs=/class/input/input4 >> U: Uniq= >> H: Handlers=kbd event4 >> B: EV=23 >> B: KEY=200 0 800000 0 0 0 >> B: SW=4 > does bare tslib work? > > apt-get install libts-bin > TSLIB_TSDEVICE=/dev/input/eventX TSLIB_CONSOLEDEVICE=none ts_test > TSLIB_TSDEVICE=/dev/input/eventX TSLIB_CONSOLEDEVICE=none ts_calibrate > > >> installed libts-bin, and, I entered the next two lines without success: >> debian-gta02:~# TSLIB_TSDEVICE=/dev/input/eventX >> TSLIB_CONSOLEDEVICE=none ts_test >> /dev/input/eventX: No such file or directory >> debian-gta02:~# TSLIB_TSDEVICE=/dev/input/eventX >> TSLIB_CONSOLEDEVICE=none ts_calibrate >> ts_open: No such file or directory > > is xorg configured accordingly? > > cat /etc/X11/xorg.conf > >> returns: >> debian-gta02:~# cat /etc/X11/xorg.conf >> # Xorg confiugration for an Openmoko FreeRunner >> Section "InputDevice" >> Identifier "Configured Touchscreen" >> Driver "tslib" >> Option "CorePointer" "true" >> Option "SendCoreEvents" "true" >> Option "Protocol" "Auto" >> Option "Width" "480" >> Option "Height" "640" >> EndSection > >> Section "Device" >> Identifier "Configured Video Device" >> Driver "fbdev" >> EndSection > cheers > josch >> >> > _______________________________________________ > Smartphones-userland mailing list > Smartphones-userland@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland _______________________________________________ Smartphones-userland mailing list Smartphones-userland@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland
