I had similar problems. I use both FPing and IOSPing in my config. I set it up like this:
My probes section: *** Probes *** + FPing binary = /usr/local/sbin/fping + IOSPing binary = /usr/bin/rsh packetsize = 1024 forks = 1 Part of my Targets section: probe = IOSPing + AggregationPoints probe = IOSPing menu = Aggregation Points title = Aggregation Points ++ FromFTL menu = from-ftl title = ATM Latency from Fort Logan +++ PROBE_CONF ioshost = 10.11.12.13 iosuser = fartbox +++ ftl-to-pueblo menu = ftl-to-pub title = ATM Latency between Fort Logan and Pueblo host = 10.10.13.221 + CDHS probe = FPing menu = CDHS title = CDHS Sites ++ EDS menu = dhs-cbm-r01-l0 title = CBMS Development Site host = 10.10.1.5 And it all seems to work fine. HTH! On Fri, 24 Jan 2003, Ivajlo Nikolov wrote: > > Hi, > I can't make IOSPing work ... is there any example config file??? Sorry > but I cannot udrestand the given help in support section: > > *** Probes *** > + IOSPing > binary = /usr/bin/remsh > packetsize = 1024 > forks = 1 > > ++ PROBE_CONF > ioshost = router > iosuser = user > > Here is section *** Probes *** in my config file: > > *** Probes *** > > + FPing > binary = /usr/local/sbin/fping > > + IOSPing > binary = /usr/bin/rsh > packetsize = 1024 > forks = 1 > ++ PROBE_CONF > ioshost = router.domain.net > iosuser = user > > And here is the result when I'm starting smokeping: > > ERROR: /home/ivailon/smokeping/etc/config, line 66: no sections are > allowed > > > So please help me with this problem. If you can send me an example config > file for using FPing and IOSPing. > > I > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Help mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/smokeping-users > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
