Hi All, I have a strange problem with smokeping (version 1.16):
My smokeping is set up so that about 15 hosts are graphed ok, but there is a single host which has no data. Every few hours there shows up a single red bar in the charts (meaning 19/20 packet loss) and then there is more emptyness for a long time period again. When I use ping or fping from the smokeping host command line to ping the host all is fine, I get 0% PL and an average RTT of about 50ms: $ fping -c 5 10.60.2.20 10.60.2.20 : [0], 84 bytes, 44.2 ms (44.2 avg, 0% loss) 10.60.2.20 : [1], 84 bytes, 44.2 ms (44.2 avg, 0% loss) 10.60.2.20 : [2], 84 bytes, 43.5 ms (44.0 avg, 0% loss) 10.60.2.20 : [3], 84 bytes, 42.9 ms (43.7 avg, 0% loss) 10.60.2.20 : [4], 84 bytes, 42.3 ms (43.4 avg, 0% loss) 10.60.2.20 : xmt/rcv/%loss = 5/5/0%, min/avg/max = 42.3/43.4/44.2 Anyone got an idea why smokeping is not graphing anything for a host that is up and reachable from the smokeping machine ? Thanks for reading this far, I hope someone can help. best regards, Dieter -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
