I changed the step value in my config to 900 seconds as with what I'm monitoring 15 minute increments is fine. However, the x-axis scale is still five minute intervals (see http://www.silvertree.org/smokeimg/BBR_TC_MON/TC_ISUP/TCVI_last_108000.png).
I'd like for the minor gridlines to be 15 minutes and the major grid lines 1 hour (thus each 15 minute interval will be one chart "pixel".). I added '--x-grid |MINUTE:10:HOUR:1:HOUR:1:0:%X' on lines 486 and 736 in Smokeping.pm but it seems to have no effect (I found that in the RRDtool documentation, just modified to suit my needs). How can I make the pixels on the graphs match my step value? And I don't want to make the graph "longer". I changed it to 9 hours and it worked as I expected, but that's not an acceptable solution. I should be able to have a graph range of 3 hours with 15 minute granularity without it taking up 3 whole pixels on the graph. Thanks for your help! Scott | -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
