Hi Bernd,
I have noticed problems with using smokeping to monitor large numbers of
hosts, where fping would not wait long enough for replies to come back
from the slowest servers. This probably depends on the order in which
they are pinged. You could try modifying smokeping/lib/probes/FPing.pm,
to add an extra parameter to the fping command time, to set the timeout.
For example:
my $pid = open3($inh,$outh,$errh,
$self->{properties}{binary}, @bytes,
'-C', $self->{cfg}{Database}{pings},
'-q','-B1','-i10','-r1','-t20000',
@{$self->addresses});
In this case I have added '-t20000' to set the timeout to 20 seconds.
Probably a 1 second timeout (-t1000) would work better for you.
To support my number of hosts, I had to hack fping.pm to reduce the
select time. I can explain more if anyone is interested.
Cheers, Chris.
On Thu, 2005-01-20 at 08:34, [EMAIL PROTECTED] wrote:
> Hi,
>
> I`m new with smokeping and monitor Satellite-links with about 600 ms rtt
> since a few days. Now I recognized that some host is (regarding smokeping)
> always loosing one of twenty packets. If I ping this host directly from the
> prompt, it doesn`t loose any packet.
> Now I`ve changed position of that host in config-file and it is also free of
> errors, but instead another host looses one of twenty packets!
>
> Any idea?
> Regards,
> Bernd
>
>
>
> --
> Unsubscribe mailto:[EMAIL PROTECTED]
> Help mailto:[EMAIL PROTECTED]
> Archive http://www.ee.ethz.ch/~slist/smokeping-users
> WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
(aidworld) chris wilson | chief engineer ([EMAIL PROTECTED])
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/smokeping-users
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
