On Mon, Sep 12, 2005 at 09:43:22AM +0800, ChunjingHan wrote: > But on my web page ,the graph have no data at all.
Hi, what's the output of smokeping --debug'? Have you configured the router side like the telnetIOSPing docs say? > Warning: no logging method specified. Messages will be lost. You should enable syslog logging (see the syslogfacility option). > binary = /var/www/cgi-bin/smokeping/lib/probes/telnetIOSPing.pm This line doesn't do anything. It can be removed. You should upgrade to Smokeping 2.0.1, it's much better at checking the syntax of the config file and reporting any problems. Be sure to read the smokeping_upgrade document, there are a couple of gotchas for TelnetIOSPing. > I have another question.If I use both the fping and telnetIOSPing ,Can I put > the two probe in one config file? Yes, just list them both in the ***Probes*** section and then choose between them for each target with the 'probe=XXX' setting. There's an example of how to do this with Smokeping 2.0.1 in the smokeping_examples document. HTH, -- Niko -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/smokeping-users WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
