Dne středa 08 březen 2006 16:09 hans napsal(a):
> hi
>
> i have the following default configuration at smokeping
>
> *** Database ***
> step = 300
> pings = 20
>
> i want to have a better granularity, because a break
> of a leased line of even 4 minutes couldn't be detect
> in the worst case.
>
> what happens, if i change to
> step = 30
> pings = 10
>
> would rrdtools show correctly ?
> should i delete the existings rrd-files bevor ?
>
> best regards
> hans
Hi,
you have to reconfigure whole database definition
*** Database ***
# every 30 seconds send 10 pings (it is quite lot IMHO)
step = 30
pings = 10
# consfn mrhb steps total
AVERAGE 0.5 1 2880 # 24 hours of full data
AVERAGE 0.5 60 1344 # 28 days of 1half hour averages
MIN 0.5 60 1344
MAX 0.5 60 1344
AVERAGE 0.5 720 1600 # 400 days of 6hour averages
MAX 0.5 720 1600
MIN 0.5 720 1600
The RRD files will be quite big so the polling machine will have quite big IO
wait.
--
Antonín Faltýnek
e-mail: [EMAIL PROTECTED]
icq: 76225401
------------------------------------------------------------
You can do that without any technological mumbo-jumbo...
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/smokeping-users
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
