Here is a script I called TelnetIOSPingVRF
It works like a charm now after some modifications to TelnetIOSPing
Just add one line to the target config "vrf = vrf1" for example.
með kveðju / best regards
Guðmundur Örn Ingvarsson
MCP & RHCE
Netkerfisstjóri / Network Systems Administrator
Who we are | Our Commitment | Contact Us | Terms of use | Disclaimer
TM Software - Holtasmári 1, IS-201 Kópavogur, Iceland
Tel +354 545 3000 Fax +354 545 3001 - [EMAIL PROTECTED]
-----Original Message-----
From: Niko Tyni [mailto:[EMAIL PROTECTED]
Sent: 17. mars 2006 23:19
To: Guðmundur Örn Ingvarsson - TM Software Skyggnir
Cc: [EMAIL PROTECTED]
Subject: Re: TelnetIOSPing
On Fri, Mar 17, 2006 at 02:06:42PM -0000, Guðmundur Örn Ingvarsson - TM
Software Skyggnir wrote:
> I modified the older version of this probe to include vrf pinging.
>
> Ping vrf dsfdsf
>
> Instead of just ping
>
> But now I can't get it to work on the new probe with the 2.0.7 version.
> I declare the vrf and add it to the ping line but I get this error.
>
> ERROR: etc/config, line 137: unknown variable 'vrf'
Hi,
please use the smokeping-users mailing list in the future instead of my
personal address, so other people can pop in too. I'm CC'ing the list.
The problem is that the 2.0 series of Smokeping have a much more strict
syntax checking for the config file. Apparently you have specified the
new 'vrf' variable in your config file, but the probe doesn't declare
it like it should.
Please see the smokeping_extend document.
Please also consider sending your modifications to us as a patch, so
other people can benefit from them too.
HTH,
--
Niko
-- Attached file removed by Ecartis and put at URL below --
-- Type: application/octet-stream
-- Desc: TelnetIOSPingVRF.pm
-- Size: 8k (9069 bytes)
-- URL : http://lists.ee.ethz.ch/p/TelnetIOSPingVRF.pm
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://lists.ee.ethz.ch/smokeping-users
WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
