Hi Daniel, you have to configure the Alerts section and thenn specify which alerts you want for your probes ...
make sure you use smokeping 2.x and not some old 1.x version ... it has gotten much better cheers tobi Today DANIEL MAGNUSZEWSKI wrote: > One more question... > > If I want to start alerting and sending traps based on thresholds, how > would I go about setting that up? Even if you can point me in the right > direction, I'd appreciate it. > > Thanks! > > -Dan > > >>> "DANIEL MAGNUSZEWSKI" <[EMAIL PROTECTED]> 08/23/06 11:50 > AM >>> > That's it! Thanks! > > -Dan > > >>> "Klaus Kastens" <[EMAIL PROTECTED]> 08/23/06 11:02 AM >>> > Hello Daniel, > > On Wed, 23 Aug 2006 10:06 -0400, DANIEL MAGNUSZEWSKI wrote: > > I forgot to mention that I am running Smokeping version 1.38 > > Sorry, I simpy assumed you were using Smokeping 2.x. > In 1.x the configuration syntax is different, ioshost was > configured per "target" in an additional PROBE_CONF section, > not sure if is possible to set this in the "probes" configuration. > > Here is an excerpt of a working 1.43 conf with default FPing: > > *** Probes *** > > + FPing > binary = /opt/csw/sbin/fping > > + CiscoRTTMonEchoICMP > forks=17 > > *** Targets *** > > probe = FPing > > menu = Top > title = Network Latency Grapher > remark = *UNDER CONSTRUCTION* > > + level1 > menu = ... > title = ... > > ++ device1 > menu = ... > title = ... > host = device1 > probe = CiscoRTTMonEchoICMP > +++ PROBE_CONF > ioshost = [EMAIL PROTECTED] > > ++ device2 > menu = ... > title = ... > host = device2 > probe = CiscoRTTMonEchoICMP > +++ PROBE_CONF > ioshost = [EMAIL PROTECTED] > > > Klaus > > -- Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten http://tobi.oetiker.ch [EMAIL PROTECTED] ++41 62 213 9902 -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/smokeping-users WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
