With SpeedyCGI we're still seeing a fairly slower response from the 2.x installation. Now we're talking about maybe 5-6 secs instead of the 12+ secs, but the 1.x installation can still do it in about 2 secs. Is there anything else I can check out or try?
Thanks, Scott On Nov 14, 2007 9:51 AM, Scott Moseman <[EMAIL PROTECTED]> wrote: > > "This script runs with normal perl. BUT it will appear to be very > slow, because it does a lot of things when starting up. So if the > script has to be started a fresh on every click, this is both slow and > a tough thing for your webserver. I therefore strongly recomment using > SpeedyCGI." > > Perhaps that is my problem. I guess I shall investigate using SpeedyCGI now. > > Thanks, > Scott > > > On Nov 14, 2007 9:23 AM, Scott Moseman <[EMAIL PROTECTED]> wrote: > > > > We have had a 1.34 installation running forever now. I'm tinkering > > with 2.2.7 (on the same server). I setup all of the out-of-the-box > > options to get 2.2.7 running and moved over the "meat" of the config > > file from my 1.34 installation, so it would be polling and displaying > > the same devices. The web interface on 2.x seems incredibly slow. > > For instance, when pulling up a category with 10 devices, it takes 2 > > secs to see it in 1.34 -- but it takes 12+ secs in my 2.2.7. What's > > up with that? 1.34 is using rrdtool 1.0.33 and 2.2.7 is using rrdtool > > 1.2.24, in case that matters. > > > > Thanks, > > Scott > > > _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
