>> i received 2 alerts when i have 80% percent of packet loss.
Do you mean that you received both the alerts for 'packetloss_warning'
and 'pactketloss_critical' ?
>> What Can I do tha i can get only one notifications.
You just need to set a priority for your different alerts.
If you set packetloss_critical to priority = 1 and packetloss_warning to
priority = 2 then that should solve your problem.
IE - When packetloss exceeds 60%, which is the trigger point for
packetloss_critical, it will only send that particular alert [and not
packetloss_warning], because it's got a higher priority.
That's very simple to implement ...
`
+packetloss_warning
type = loss
# in percent
pattern = ==0%,==0%,>20%,>20%,>20%
comment = Enlace con Perdidas de Paquetes Repentina
priority = 2
+packetloss_critical
type = loss
# in percent
pattern = ==0%,==0%,>60%,>60%,>60%
comment = Enlace con Perdidas de Paquetes Severa
priority = 1
>> Another question its how many operators the pattern has and what it
is its meaneing?
==50 means exactly equal to 50. Not higher, not lower ... but exactly
equal to 50.
=>50 means equal to, or greater than 50. IE - has to be 50 or higher.
=<50 means equal to, or less than 50. IE - has to be 50 or lower.
>50 means greater than 50. IE - It has to be 51 or higher ... equaling
exactly 50 won't count.
<50 means less than 50. IE - It has to be 49 or lower ... equaling
exactly 50 won't count.
>> I see a priority and i set the priority and i get a error message
when i try to restart smokeping.
I'm not really sure what you mean by this? What does the error message say?
Hi Guys
Exactly i need help with the smokeping alerts. Exactly i want to make
somethin like nagios do with the services notifications
(warning,critical and ok) with the applications smokeping. If i put
in ths way
+packetloss_warning
type = loss
# in percent
pattern = ==0%,==0%,>20%,>20%,>20%
comment = Enlace con Perdidas de Paquetes Repentina
+packetloss_critical
type = loss
# in percent
pattern = ==0%,==0%,>60%,>60%,>60%
comment = Enlace con Perdidas de Paquetes Severa
+packetloss_ok
type = loss
# in percent
pattern = >100%,>100%,==0%,==0%,==0%
comment = Enlace Sin Perdidas de Paquetes
i received 2 alerts when i have 80% percent of packet loss. I see a
priority and i set the priority and i get a error message when i try
to restart smokeping. What Can I do tha i can get only one
notifications. Another question its how many operators the pattern
has and what it is its meaneing?
Thank you for attention
Best Regards
Carlos Armas
_______________________________________________
smokeping-users mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
