On 23/07/2008, at 15.09, Eric Brander wrote: > On Wed, Jul 23, 2008 at 5:16 AM, Jon Bendtsen <[EMAIL PROTECTED]> > wrote: >>> >>> *** Probes *** >>> >>> + FPing >>> binary = /usr/bin/fping >>> >>> ++ping1024 >>> packetsize = 1024 >> >> That did not work. >> >> now it says "ERROR: /etc/smokeping/config, line 177: probe FPing >> missing from the Probes section" >> >> >> >> JonB >> > > > Here's what I use and it works great: > > + FPing > binary = /usr/sbin/fping > offset = random > > ++ FPing1min > step = 60 > packetsize = 1000 > > ++ FPing5min > step = 300 > packetsize = 1000
Great, that didnt work either. Starting smokeping: ERROR: /etc/smokeping/config, line 185: probe FPing missing from the Probes section I will post the either config except for most of the targets. i use 2.0.9-2 on debian stable # Note that all IP addresses in this file are false, to prevent some # machine falling under a deadly DOS storm because all users keep # the same addresses in their config. *** General *** ################################################ # DON'T TOUCH UNLESS YOU KNOW WHAT YOU'RE DOING # BETWEEN THESE MARKS! ################################################ sendmail = /usr/sbin/sendmail imgcache = /var/www/smokeping imgurl = ../smokeping datadir = /var/lib/smokeping piddir = /var/run/smokeping smokemail = /etc/smokeping/smokemail tmail = /etc/smokeping/tmail ################################################ # END OF DON'T TOUCH SECTION ################################################ # Please edit this to suit your installation owner = Jon [EMAIL PROTECTED] Sophus contact = [EMAIL PROTECTED] cgiurl = http://dksrv003.laerdal.global/cgi-bin/smokeping.cgi mailhost = dksmtp.laerdal.global # specify this to get syslog logging syslogfacility = local0 # each probe is now run in its own process # disable this to revert to the old behaviour # concurrentprobes = no *** Alerts *** to = [EMAIL PROTECTED] from = [EMAIL PROTECTED] +bigloss type = loss # in percent pattern = ==0%,==0%,==0%,==0%,>0%,>0%,>0% comment = suddenly there is packet loss +someloss type = loss # in percent pattern = >0%,*12*,>0%,*12*,>0% comment = loss 3 times in a row +startloss type = loss # in percent pattern = ==S,>0%,>0%,>0% comment = loss at startup +rttdetect type = rtt # in milli seconds pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100 comment = routing mesed up again ? *** Database *** step = 300 pings = 20 # consfn mrhb steps total AVERAGE 0.5 1 1008 AVERAGE 0.5 12 4320 MIN 0.5 12 4320 MAX 0.5 12 4320 AVERAGE 0.5 144 720 MAX 0.5 144 720 MIN 0.5 144 720 *** Presentation *** template = /etc/smokeping/basepage.html + overview width = 600 height = 50 range = 10h + detail width = 600 height = 200 unison_tolerance = 2 "Last 3 Hours" 3h "Last 30 Hours" 30h "Last 10 Days" 10d "Last 400 Days" 400d *** Probes *** + FPing binary = /usr/bin/fping #+ FPing1024 #binary = /usr/bin/fping #packetsize = 1024 # #+ FPing2048 #binary = /usr/bin/fping #packetsize = 2048 # #+ FPing4096 #binary = /usr/bin/fping #packetsize = 4096 # #+ FPing8192 #binary = /usr/bin/fping #packetsize = 8192 # #+ FPing16384 #binary = /usr/bin/fping #packetsize = 16384 # #+ FPing32768 #binary = /usr/bin/fping #packetsize = 32768 +SSH binary = /usr/bin/ssh-keyscan # mandatory forks = 5 offset = 50% step = 300 timeout = 15 # The following variables can be overridden in each target section keytype = dsa pings = 5 +EchoPingSmtp binary = /usr/bin/echoping forks = 5 offset = 50% step = 300 # The following variables can be overridden in each target section #extraopts = -some-letter-the-author-did-not-think-of ipversion = 4 pings = 5 priority = 6 timeout = 1 waittime = 1 +EchoPingHttp binary = /usr/bin/echoping forks = 5 offset = 50% step = 300 # The following variables can be overridden in each target section #extraopts = -some-letter-the-author-did-not-think-of ignore_cache = yes ipversion = 4 pings = 5 port = 80 priority = 6 revalidate_data = no timeout = 1 url = / waittime = 1 *** Targets *** probe = FPing ## You have to edit and uncomment all what you want below this. # Please, refer to smokeping_config man page for more info # The given adresses aren't real to avoid DoS. menu = Top title = Network Latency Grapher remark = Welcome to the SmokePing website of Laerdal Sophus + Local menu = Local title = Local Network ++ LocalMachine menu = Local Machine title = This own machine host = localhost + jon menu = jon title = Jons private hosts ++ jbit menu = jbit title = jbit.dk host = jbit.dk ++ jonhjemme menu = hjemme title = Jons hjemme ip host = 77.75.164.169 #++ jon1024 #menu = 1024 #probe = FPing1024 #title = 1024 #host = 77.75.164.169 #++ jon2048 #menu = 2048 #probe = FPing2048 #title = 2048 #host = 77.75.164.169 #++ jon4096 #menu = 4096 #probe = FPing4096 #title = 4096 #host = 77.75.164.169 #++ jon8192 #menu = 8192 #probe = FPing8192 #title = 8192 #host = 77.75.164.169 #++ jon16384 #menu = 16384 #probe = FPing16384 #title = 16384 #host = 77.75.164.169 #++ jon32768 #menu = 32768 #probe = FPing32768 #title = 32768 #host = 77.75.164.169 _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
