Hi Rune, Thanks. I didn't find it in "sh ver" but in "show inventory".
NAME: "5", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 5.2" Thanks for the information, I'll have to see if we can use 12.2(33)SRB5 to get this feature. Regards, Manuel ________________________________ From: Rune Thorsplass [mailto:[email protected]] Sent: Thursday, 21 May 2009 4:20 PM To: Noriega, Manuel Subject: Re: [smokeping-users] Using CiscoRTTMonEchoICMP with VRFs Hi Manuel SUP is the "supervisor-card" you have in your Cisco 7606. If you run "sh ver" on your cisco-console an look for "Supervisor Engine". According to Cisco Software Advisor you need 12.2(33)SRB5 to get "IP SLAs - MPLS VPN Awareness" : This feature was formerly known as Service Assurance Agent (SAA). Cisco IOS IP Service Level Agreements (IP SLAs) is a capability embedded in Cisco IOS Software, and allows Cisco customers to understand IP service levels, increase productivity, lower operational costs, and reduce the frequency of network outages. The MPLS VPN operation feature allows SAA probe traffic to be forwarded using the MPLS VPN VRF routing table. Customers using this feature will create probes on PE routers utilizing MPLS VPN or on VRF lite enabled devices. RuneT ----- Original Message ----- From: Noriega, Manuel<mailto:[email protected]> To: Rune Thorsplass<mailto:[email protected]> Sent: Thursday, May 21, 2009 6:24 AM Subject: RE: [smokeping-users] Using CiscoRTTMonEchoICMP with VRFs Hi Rune, The IOS image is System image file is "disk0:s72033-advipservicesk9_wan-mz.122-18.SXF9.bin" I'm new to smokeping and don't know what SUP is. If it is the smokeping version I am running SmokePing-2.4.2<http://oss.oetiker.ch/smokeping/counter.cgi/2.004002> on Centos 5.3. Do you know the minimum IOS version that is IP SLA vrf-aware? Thanks, Manuel ________________________________ From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Rune Thorsplass Sent: Thursday, 21 May 2009 1:30 AM To: [email protected] Subject: Re: [smokeping-users] Using CiscoRTTMonEchoICMP with VRFs Hi A lot of older IOS isn't IP SLA vrf-aware. Could you inform me which IOS image you are running ? Run "sh ver" on your console and normaly look for image at disk0: Which SUP are you using?? Also be aware of IOS 12.2(18)SXF9 have some serious software issues and are quite old. RuneT ----- Original Message ----- From: Noriega, Manuel<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Sent: Tuesday, May 19, 2009 4:05 AM Subject: [smokeping-users] Using CiscoRTTMonEchoICMP with VRFs Hello, I've recently setup smokeping version 2.004002 and am trying to get CiscoRTTMonEchoICMP to work with VRFs but when I run it I get the following error: SNMP Error: Received SNMP response with error code error status: noCreation index 14 (OID: 1.3.6.1.4.1.9.9.42.1.2.2.1.26.22187) SNMPv2c_Session (remote host: "10.32.0.218" [10.32.0.218].161) community: "minmssecret" request ID: 422131458 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) My config is: ++ 10-6-40-140 menu = 10.6.40.140 probe = CiscoRTTMonEchoICMP title = 10.6.40.140 vrf myVrfName host = 10.6.40.140 ioshost = [email protected] packetsize = 56 tos = 160 vrf = myVrfName And this is from a cisco CISCO7606 router running IOS Version 12.2(18)SXF9. Anyone run into a similar issue? Googling hasn't helped in finding a solution. Thanks, Manuel ________________________________ _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
_______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
