Hello again, and thanks for the email :) "community" would be the RW community of the probe router (replaced the real one for obvious reasons). I see you have a few more options defined in your setup. I'll attempt to do the same, although it doesn't seem to be required (after looking at the docs)
Best regards, Vidar S > -----Original Message----- > From: Rune Thorsplass [mailto:[email protected]] > Sent: 1. februar 2010 19:55 > To: Stokkenes Vidar; [email protected] > Subject: Re: [smokeping-users] CiscoRTTMonTcpConnect difficulties with > Cisco7200 VXR series > > Hi > What is your snmp (rw) community for IP SLA MIB on RouterA? Is it > "community" ? > > Here is what I'm using. > > ++++ Office1 > menu = Office1 > title = City 1 > probe = CiscoRTTMonTcpConnect # if the default probe is something else > host=10.174.200.4 # DB server at Office1 > ioshost= [email protected] # private is my snmp write community > iosint = 10.174.200.161 # Using ip address from Lan-interface of the > router > port = 2025 > pings = 3 > tos = 160 > > > RuneT > ----- Original Message ----- > From: "Stokkenes Vidar" <[email protected]> > To: <[email protected]> > Sent: Monday, February 01, 2010 3:00 PM > Subject: [smokeping-users] CiscoRTTMonTcpConnect difficulties with > Cisco7200 > VXR series > > > > Hello folks, > > > > I seem to be having problems with doing RTT checks via SNMP using a > Cisco > > 7204 VXR router as the probe device. We are currently running > Smokeping > > v2.004002 on the server. > > > > Here is a sample of my config: > > > > Global probe config: > > > > + CiscoRTTMonTcpConnect > > > > forks = 5 > > offset = 50% > > step = 300 > > timeout = 60 > > > > Host config: > > > > ++++++ LocationAtoB > > menu = LocationAtoB > > title = Roundtrip from Location A to Location B > > probe = CiscoRTTMonTcpConnect > > host = routerB.domain.com > > port = 22 > > ioshost = [email protected] > > > > But my logfile says the following: > > > > Feb 1 14:28:16 server smokeping[9574]: SNMP Error: Received SNMP > response > > with error code error status: commitFailed index 1 (OID: > > 1.3.6.1.4.1.9.9.42.1.2.1.1.9.9574) SNMPv2c_Session (remote host: > > "routerB.domain.com" [192.168.10.1].161) > community: > > "community" request ID: 1390275956 > PDU > > bufsize: 8000 bytes timeout: 2s > > retries: 5 backoff: 1) at > > /usr/lib/smokeping/SNMP_util.pm line 786 > > > > According to the Cisco 7200 documentation it should support the > > CISCO-RTTMON-MIB, but maybe the answer smokeping gets from the router > is > > considered as "rubbish" (as the logfile implies) Also, when I ssh > from the > > CLI from routerA to routerB it works without a problem. All the > graphs > > with this probe is empty. I am doing the same against a Cisco > Catalyst > > 6500 with no problems at all. > > > > Can someone please tell me why this won't work? > > > > > > Best regards, > > > > Vidar S > > > > > > > > _______________________________________________ > > smokeping-users mailing list > > [email protected] > > https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users > > > _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
