Hi Tobi, I found the issue... The rrdtool package I downloaded from sunfreeware.com was using perl 5.8.7 in dependencies. My perl was 5.8.4 as it is the default perl included in the last Solaris 10 release (sol-10-u10-ga2-x86).
I updated to perl 5.10.1 and rrdtool packages from CSW and I switched Smokeping files to perl 5.10.1 and CSW rrdtool. It worked normal, right away. Thank you for your help, Julian ----- Original Message ----- From: "Tobias Oetiker" <[email protected]> To: "Julian" <[email protected]> Cc: <[email protected]> Sent: Tuesday, October 18, 2011 6:54 AM Subject: Re: [smokeping-users] RRD parameter mismatch - Wrong value of step > Hi Julian, > > Today Julian wrote: > >> Hi Tobi, >> That's quite a lot of info, so it looks like this: >> >> # /usr/local/rrdtool-1.2.19/bin/rrdtool info Router.rrd >> filename = "Router.rrd" >> rrd_version = "0003" >> step = 300 > > > hmmm so for some reason, smokeping is picking up a completely > different step size than actually is in this rrd file ... > > so what happens if you run > > use RRDs; > use Data::Dumper; > > my @out = RRDs::info "Router.rrd"; > print Dumper \@out; > > cheers > tobi > > > > -- > Tobi Oetiker, OETIKER+PARTNER AG, Aarweg 15 CH-4600 Olten, Switzerland > http://it.oetiker.ch [email protected] ++41 62 775 9902 / sb: -9900 _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
