Hi Ged, many thanks for this detailed description.
I would like to have always a red line if a device isn't reachable. Do you know, how I configure this in the source? Regards Tobias -----Ursprüngliche Nachricht----- Von: G.W. Haywood [mailto:[email protected]] Gesendet: Donnerstag, 17. Januar 2013 17:00 An: Ackermann, Tobias Cc: [email protected] Betreff: Re: AW: [smokeping-users] No graph by packet loss Hello again, On Thu, 17 Jan 2013, Ackermann, Tobias wrote: > I thought if a device isn't reachable the graph will be shown a red line. The graphs are made up of separate segments. Each segment represents the ping results for a short period of time. In my systems that is usually five minutes. The position (along the vertical axis) of the coloured line represents the 'median' ping round-trip time for that period and the colour of the line indicates the number of pings which were lost. If, during some period, pings are returned but in the immediately following period no pings are returned, then the 'median' line of the graph for that period will be coloured red. If in the next following period some pings are returned, a line will be drawn in an appropriate colour to represent that. But if *again* no pings are returned, no line will be shown on the graph -- it will be blank as you have seen. You can of course change the source to make it do whatever you prefer. -- 73, Ged. KION Information Management Services GmbH, Sitz der Gesellschaft: Wiesbaden, Registergericht: Wiesbaden HRB 22949, USt-Id-Nr. DE 254777238, Geschäftsführung: Jeffrey R. Smith (Vorsitzender), Bart Wijnen _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
