I keep forgetting to send to the list - Sorry Nick, you're going to get a duplicate!
--- I think you'd have to build duplicate targets, and then assign one target to the master only, and the other target to the slave. [Where the target is the same device.] Then you'd assign different alert levels for the two targets. But I don't think there's a way to have two different alerts on the same target for different slave(s)/master(s). So, to get multiple separate alerts for the same device, you'll have to have the same device as two different targets. [And that will generate the ping or other check traffic again for each unique alert group...and also store an additional RRD file etc.] I'd guess that using Nagios to generate the alerts would probably be better. [Though the alerting condidtions nuance with Nagios isn't as sophisticated as in SP.] I use Nagios, not because I want multiple levels of thresholds, but because I want different alerts at different times, and destinations etc. Nagios has much more sophisticated alert/notification handling than SP. Perhaps someone else will have other suggestions, but that's the only way I can see to do it. -Greg --- NT> Hi, NT> Does anybody have any suggestions? NT> Thanks In Advance NT> Nick NT> On Fri Jul 12 18:02:17 2013, Nick Toseland wrote: >> Hi All, >> >> Is it possible to have alerts per slave? >> >> I have a slave that is approx 140ms from the master. >> >> If for instance I ping the www.bbc.co.uk from the master it is about 150 >> ms RTT, from the slave it is 12ms.. >> >> I would like an alert to fire if the RTT from the master goes above >> 200ms and an alert if the RTT from the slave goes about 40ms >> >> Many thanks >> >> Nick NT> _______________________________________________ NT> smokeping-users mailing list NT> [email protected] NT> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users -- Gregory Sloop, Principal: Sloop Network & Computer Consulting Voice: 503.251.0452 x82 EMail: [email protected] http://www.sloop.net --- _______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
