Here is the apache error log that is listing smokeping: http://pastebin.com/Knm1Cmw1
As for debug mode, here's my output: http://pastebin.com/8txnhnkv The host names do resolve; here's an example: [04:07 PM]superuser@pipeline[/opt/smokeping/bin] > time fping larender001a larender001a is alive real 0m0.014s user 0m0.000s sys 0m0.000s On Tue, Mar 4, 2014 at 3:32 PM, Brett Bronson <[email protected]>wrote: > Also, it looks like the version I have running is actually the latest, I > assumed it would output the version as 2.6.9. Sorry > > > On Tue, Mar 4, 2014 at 3:29 PM, Brett Bronson < > [email protected]> wrote: > >> Okay, it looks like I was actually using an older version of smokeping. >> I've removed it and installed the latest version on the site and my config >> is as follows: >> http://pastebin.com/ZsLE8uCp >> >> Before, I was able to get smokeping to work fine up until I added the >> section: >> >> + nodes >> menu = Render Node Latency >> title = Render Node Latency (ICMP Pings) >> >> ++ larender001a >> host = larender001a >> ++ larender001b >> host = larender001b >> ++ larender001c >> host = larender001c >> ++ larender001d >> host = larender001d >> >> ++ larender002a >> host = larender002a >> ++ larender002b >> host = larender002b >> ++ larender002c >> host = larender002c >> ++ larender002d >> host = larender002d >> >> >> >> Now that I look at the logs, it looks like it's still using the old >> version.... >> [ ... ] >> Tue Mar 4 15:03:05 2014 - FPing: probing 5 targets with step 300 s and >> offset 116 s. >> Tue Mar 4 15:16:01 2014 - Smokeping version 2.006009 successfully >> launched. >> Tue Mar 4 15:16:01 2014 - Not entering multiprocess mode for just a >> single probe. >> Tue Mar 4 15:16:01 2014 - FPing: probing 13 targets with step 300 s and >> offset 163 s. >> Tue Mar 4 15:25:59 2014 - Smokeping version 2.006009 successfully >> launched. >> Tue Mar 4 15:25:59 2014 - Not entering multiprocess mode for just a >> single probe. >> Tue Mar 4 15:25:59 2014 - FPing: probing 13 targets with step 300 s and >> offset 159 s. >> >> Before, I used sudo apt-get install smokeping to install, but I later >> removed it using sudo apt-get remove smokeping; however, it looks like it >> didn't remove the old version? Any idea how I could resolve this so that it >> loads up the newer version? >> >> >> >> >> >> On Tue, Mar 4, 2014 at 2:28 PM, Gregory Sloop <[email protected]> wrote: >> >>> I don't see a database section, so I assume it's somewhere else. >>> [Nothing looks obviously wrong - but that was just a quick glance.] >>> >>> But when you first start SP after adding a bunch of targets, it's going >>> to have to allocate/create the RRD for each of the targets. >>> [Also, are there slaves, because it will create X * 60 new RRD's - where >>> X is how many slave SP instances you have. (In addition to the master >>> RRD's) ] >>> >>> I wouldn't think that would take 10m, but I can't see how much data >>> you're stuffing in each RRD, or if you have slaves, which might help >>> explain it. >>> >>> As to why web-pages won't work, I'm not sure. Have you looked at the >>> apache logs to see what they say? Or run SP in debug mode? [smokeping >>> --debug >>> IIRC] >>> >>> -Greg >>> >>> >>> Hello, >>> >>> I recently updated my smokeping Target configuration to include about 60 >>> of our machines in our render farm and noticed that restarting the >>> smokeping service took about 10 minutes, and now our webpage will not load. >>> >>> Any ideas? >>> >>> My config: >>> http://pastebin.com/ibNmGhAF >>> >>> >>> -- >>> Brett Bronson >>> Big Block | Pipeline TD >>> http://www.bigblockla.com >>> [m] 805-338-6520 >>> >>> >>> >> >> >> -- >> Brett Bronson >> Big Block | Pipeline TD >> http://www.bigblockla.com >> [m] 805-338-6520 >> >> > > > -- > Brett Bronson > Big Block | Pipeline TD > http://www.bigblockla.com > [m] 805-338-6520 > > -- Brett Bronson Big Block | Pipeline TD http://www.bigblockla.com [m] 805-338-6520
_______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
