Here's the error: Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom
Check that file Also, when you reply please use "reply all" so the mailing list has all the updates for this thread. On Tue, Mar 11, 2014 at 12:59 PM, Erlington Cardoza <[email protected]>wrote: > after all the calculations it says, > > Smokeping version 2.006008 successfully launched. > Not entering multiprocess mode with '--debug'. Use '--debug-daemon' for > that. > FPing: probing 2 targets with step 300 s and offset 26 s. > FPing: Executing /usr/bin/fping -C 21 -q -B1 -r1 -b5000 -t5000 -i1 -p1500 > -S192.168.1.200 -O0x20 192.168.1.101 localhost > FPing: Got fping output: '/usr/bin/fping: cannot bind source address : > Cannot assign requested address' > Calling RRDs::update(/var/lib/smokeping/Luminet/LocalMachine.rrd > --template > uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20 > 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U) > Alert "someloss": no match for target > /var/lib/smokeping/Luminet/LocalMachine > Calling RRDs::update(/var/lib/smokeping/Columbus/Columbus.rrd --template > uptime:loss:median:ping1:ping2:ping3:ping4:ping5:ping6:ping7:ping8:ping9:ping10:ping11:ping12:ping13:ping14:ping15:ping16:ping17:ping18:ping19:ping20 > 1394564045:U:20:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U:U) > Alert "someloss": no match for target /var/lib/smokeping/Colom/Colom > > > > 2014-03-11 19:43 GMT+01:00 Kwame Bahena <[email protected]>: > > read the manual, >> >> it says --config=x Use a config file different from the default >> >> >> On Tue, Mar 11, 2014 at 12:42 PM, Erlington Cardoza < >> [email protected]> wrote: >> >>> >>> Option c is ambiguous (cache-dir, check, config) >>> Usage: >>> smokeping [ --email | --makepod | --version | --restart ] >>> >>> Options: >>> >>> --man[=x] Show the manpage for the program (or for probe x, if >>> specified) >>> >>> --help Help :-) >>> >>> --email Send SmokePing Agents to all Targets marked DYNAMIC >>> >>> --config=x Use a config file different from the default >>> >>> --check Just check the config file syntax, don't start the >>> daemon >>> >>> --makepod[=x] Create POD documentation on Config file (or for probe >>> x, if specified) >>> >>> --version Show SmokePing Version >>> >>> --debug Run Only once and do not Fork >>> >>> --debug-daemon Start the daemon with debugging enabled >>> >>> --restart Restart SmokePing >>> >>> --reload Reload configuration in the running process without >>> interrupting >>> any probes >>> >>> --nodaemon Do no daemonize the process (no fork) >>> >>> --filter=x Only measure entries which pass the filter x >>> >>> --logfile=x Append warnings to logfile x. >>> >>> --static[=x] Generates a static website in directory x. If x is >>> left out, >>> pagedir from the config is used. >>> >>> --nosleep For debugging you may want to run SmokePing without >>> sleep interval >>> >>> --gen-examples Generate the smokeping_examples document and example >>> config files >>> (to be used while building inside the smokeping >>> distribution) >>> With --check : check the syntax of the generated >>> examples. >>> >>> --master-url=s Run smokeping in slave mode. Attach to master for >>> config. >>> >>> --slave-name=s By default the slave will use whatever it thinks its >>> name >>> is, when talking to its master. In some cases you may >>> probably want to override this. >>> >>> >>> --shared-secret=s File containing the shared secret for talking to >>> the server. >>> >>> --cache-dir=s Directory for temporary data storage when running in >>> slave mode. >>> >>> --pid-dir=s Directory for the PID file when running in slave mode. >>> (optional, defaults to --cache-dir) >>> >>> >>> >>> 2014-03-11 19:37 GMT+01:00 Kwame Bahena <[email protected]>: >>> >>> stop smokeping and run it from the console with >>>> >>>> smokeping -c /path/to/config_file --nodaemon --debug >>>> >>>> and see what errors you get >>>> >>>> >>>> On Tue, Mar 11, 2014 at 12:22 PM, Erlington Cardoza < >>>> [email protected]> wrote: >>>> >>>>> Ok let`s change the public IP into a private so is still the same >>>>> issue, At the beginning I thought it was an IP problem for security and I >>>>> tested before but nothing changed. So here is the conf with private IP as >>>>> I >>>>> have right know. >>>>> *** General *** >>>>> >>>>> owner = Jade Fox >>>>> contact = [email protected] >>>>> mailhost = mx.mail.cr >>>>> # NOTE: do not put the Image Cache below cgi-bin >>>>> # since all files under cgi-bin will be executed ... this is not >>>>> # good for images. >>>>> cgiurl = http://192.168.1.200/smokeping.cgi >>>>> # specify this to get syslog logging >>>>> syslogfacility = local0 >>>>> # each probe is now run in its own process >>>>> # disable this to revert to the old behaviour >>>>> # concurrentprobes = no >>>>> >>>>> @include /etc/smokeping/config.d/pathnames >>>>> >>>>> Regarding the other suggestion, I have this files: >>>>> root@Fox:/etc/smokeping/config.d# ls >>>>> Alerts General Presentation sendmail Targets >>>>> Database pathnames Probes Slaves >>>>> >>>>> In alerts I have values from smokeping webpage: >>>>> >>>>> +someloss >>>>> type = loss >>>>> # in percent >>>>> pattern = >0%,*12*,>0%,*12*,>0% >>>>> comment = loss 3 times in a row >>>>> >>>>> +lossdetect >>>>> type = loss >>>>> # in percent >>>>> pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20% >>>>> comment = suddenly there is packet loss >>>>> >>>>> +miniloss >>>>> type = loss >>>>> # in percent >>>>> pattern = >0%,*12*,>0%,*12*,>0% >>>>> comment = detected loss 3 times over the last two hours >>>>> >>>>> +rttdetect >>>>> type = rtt >>>>> # in milliseconds >>>>> pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100 >>>>> comment = routing messed up again ? >>>>> >>>>> +rttbadstart >>>>> type = rtt >>>>> # in milliseconds >>>>> pattern = ==S,==U >>>>> comment = offline at startup >>>>> >>>>> In targets : >>>>> >>>>> *** Targets *** >>>>> >>>>> probe = FPing >>>>> menu = Top >>>>> title = Network Latency Grapher >>>>> remark = Welcome to the SmokePing website of xxx Company. \ >>>>> Here you will learn all about the latency of our network. >>>>> >>>>> + Luminet >>>>> >>>>> menu = Luminet >>>>> title = Local Network >>>>> alerts = someloss >>>>> >>>>> ++ LocalMachine >>>>> >>>>> menu = Local Machine >>>>> title = This host >>>>> host = localhost >>>>> alerts = someloss >>>>> >>>>> + Colom >>>>> menu = Colom >>>>> title = Colom >>>>> >>>>> ++Colom >>>>> title = ICMP Colom >>>>> host = 192.168.1.101 >>>>> alerts = someloss >>>>> >>>>> in Probes: >>>>> +FPing >>>>> >>>>> binary = /usr/bin/fping >>>>> >>>>> And that's all I have configured. >>>>> Regards >>>>> >>>>> >>>>> 2014-03-11 19:09 GMT+01:00 Kwame Bahena <[email protected]>: >>>>> >>>>> There is little help I can provide if you don't share all your config. >>>>>> You say that you replaced the values yet in the config you shared I >>>>>> see: >>>>>> >>>>>> cgiurl = http://my.domain/smokeping.cgi >>>>>> >>>>>> and also, that's not the only config file you need to work on, you >>>>>> also need to look in the files in /etc/smokeping/conf.d >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Tue, Mar 11, 2014 at 12:06 PM, Erlington Cardoza < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Yes, I replace the values in this email for security because it has >>>>>>> a public IP, if not I couldn`t see that my graph has not data... >>>>>>> >>>>>>> >>>>>>> 2014-03-11 19:03 GMT+01:00 Kwame Bahena <[email protected]>: >>>>>>> >>>>>>> But you need to replace your cgiurl value, is your "my.domain" >>>>>>>> really your domain? you need to know at least the ip of your server. >>>>>>>> Do you know the ip of it? >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Mar 11, 2014 at 11:56 AM, Erlington Cardoza < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Yeah sorry for my lost, in that guide the config file has the same >>>>>>>>> configuration of my General file I showed you before. >>>>>>>>> /etc/smokeping/config.d/General: >>>>>>>>> >>>>>>>>> *** General *** >>>>>>>>> >>>>>>>>> owner = my owner >>>>>>>>> contact = [email protected] >>>>>>>>> mailhost = mx.mail.com >>>>>>>>> # NOTE: do not put the Image Cache below cgi-bin >>>>>>>>> # since all files under cgi-bin will be executed ... this is not >>>>>>>>> # good for images. >>>>>>>>> cgiurl = http://my.domain/smokeping.cgi >>>>>>>>> # specify this to get syslog logging >>>>>>>>> syslogfacility = local0 >>>>>>>>> # each probe is now run in its own process >>>>>>>>> # disable this to revert to the old behaviour >>>>>>>>> # concurrentprobes = no >>>>>>>>> >>>>>>>>> @include /etc/smokeping/config.d/pathnames >>>>>>>>> >>>>>>>>> I guess it is an older version of smokeping. >>>>>>>>> Regards >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> 2014-03-11 18:47 GMT+01:00 Kwame Bahena <[email protected]>: >>>>>>>>> >>>>>>>>> So you are really lost. >>>>>>>>>> Follow a howto like this >>>>>>>>>> http://www.howtoforge.com/monitoring_network_latency_smokeping_debian_etch >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Tue, Mar 11, 2014 at 11:44 AM, Erlington Cardoza < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> I`m sorry in the guide I followed it just said type "sudo >>>>>>>>>>> apt-get install smokeping". I searched that config file with "find" >>>>>>>>>>> and I >>>>>>>>>>> found this one: /etc/smokeping/config, and it has this config: >>>>>>>>>>> >>>>>>>>>>> @include /etc/smokeping/config.d/General >>>>>>>>>>> @include /etc/smokeping/config.d/Alerts >>>>>>>>>>> @include /etc/smokeping/config.d/Database >>>>>>>>>>> @include /etc/smokeping/config.d/Presentation >>>>>>>>>>> @include /etc/smokeping/config.d/Probes >>>>>>>>>>> @include /etc/smokeping/config.d/Slaves >>>>>>>>>>> @include /etc/smokeping/config.d/Targets >>>>>>>>>>> >>>>>>>>>>> is that what you`re talking about? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2014-03-11 18:34 GMT+01:00 Kwame Bahena <[email protected]>: >>>>>>>>>>> >>>>>>>>>>> The smokeping config file. Do you know where is it? >>>>>>>>>>>> Did you follow a howto to install and configure it? >>>>>>>>>>>> >>>>>>>>>>>> Cheers, >>>>>>>>>>>> -- >>>>>>>>>>>> Kwame >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:33 AM, Erlington Cardoza < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Which configuration do you need? smokeping conf or Debian?. >>>>>>>>>>>>> Which command I need to use? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2014-03-11 18:31 GMT+01:00 Kwame Bahena <[email protected]> >>>>>>>>>>>>> : >>>>>>>>>>>>> >>>>>>>>>>>>> You have an error on your config file. >>>>>>>>>>>>>> The error says that the file or directory /etc/config does >>>>>>>>>>>>>> not exist. >>>>>>>>>>>>>> Can you pastebin your config some place and share it? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Kwame >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Tue, Mar 11, 2014 at 11:27 AM, Erlington Cardoza < >>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hey guys, first of all, thanks to oetiker for this excellent >>>>>>>>>>>>>>> tool. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Second, I have done the command ( smoke --debug ) and my >>>>>>>>>>>>>>> smokeping says "ERROR: loading smokeping configuration file >>>>>>>>>>>>>>> /usr/sbin/../etc/config: No such file or directory". I am >>>>>>>>>>>>>>> using Debian but I am not a master in this O.S by the way. >>>>>>>>>>>>>>> Also, my local >>>>>>>>>>>>>>> machine does graphics with data but my other host does not >>>>>>>>>>>>>>> appear the data. >>>>>>>>>>>>>>> In my desesperation I did assigned all of possible permissions >>>>>>>>>>>>>>> to the other >>>>>>>>>>>>>>> host, like this "-rwx-rwx-rwx 1 smokeping www-data" and I still >>>>>>>>>>>>>>> dont have >>>>>>>>>>>>>>> data in the new graphic, but in the local machine I do have and >>>>>>>>>>>>>>> Im not >>>>>>>>>>>>>>> using master-slave configuration. What can I do?. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks and Regards >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>> smokeping-users mailing list >>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
