Hi Matt,
To get one ping per second, you need to make step and pings the same
(i.e. 300 for both assuming default step setting).
Step is the number of seconds between RRD file updates. If you make
this number smaller, the RRD files become larger, and the I/O load on
the system increases, so the correct setting here depends on your
specific requirements, and the default of 300 seconds is a good balance.
Pings is the number of pings to run for each RRD update.
regards
Steve
On 6/04/2016 11:05 AM, Matt Martin wrote:
Hi All,
We're trying to use FPingContinuous.
Our aim is to monitor some hosts, one ping per second continuously and
to graph that data.
What is the recommended steps/pings setting for this probe to best
suit that.
Thanks!
Matt
_______________________________________________
smokeping-users mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
_______________________________________________
smokeping-users mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
