Can you remark the entire section below: # Lets add a modem gateway.0=modem1, SerialModem modem1.port=COM1 modem1.baudrate=9600 modem1.manufacturer=ERICSSON modem1.model=1001013-BVT290 modem1.protocol=PDU modem1.pin=0000 modem1.inbound=yes modem1.outbound=yes modem1.smsc_number=923210006001 modem1.init_string=ATZ\rATZ\rATZ\r
in your config file and try to start smsserver again? On Sep 8, 8:50 am, raza ali <[email protected]> wrote: > strill does'nt work > > > > > > On Tue, Sep 8, 2009 at 12:17 AM, Thanasis <[email protected]> wrote: > > > Hi, > > > You your mysql password is blank, remove the quotes from the password > > definition in your config file. > > > On Sep 5, 11:49 am, Raza <[email protected]> wrote: > > > i m not getting,how to set the gateways in smsserver.conf file. > > > > the following is my file,if u tell me exactly i shall be thankful to > > > you. > > > ***********************************************************SMSSERVER.CONF** > > *************************************************** > > > # Set a different balancer than the default. > > > smsserver.balancer=RoundRobinLoadBalancer > > > > #Set a different router than the default. > > > #smsserver.router=NumberPoolRouter > > > > # Lets add a modem > > > gateway.0=modem1, SerialModem > > > modem1.port=COM1 > > > modem1.baudrate=9600 > > > modem1.manufacturer=ERICSSON > > > modem1.model=1001013-BVT290 > > > modem1.protocol=PDU > > > modem1.pin=0000 > > > modem1.inbound=yes > > > modem1.outbound=yes > > > modem1.smsc_number=923210006001 > > > modem1.init_string=ATZ\rATZ\rATZ\r > > > > # Dummy gateways used for testing. > > > #gateway.1=Test1, TestGateway > > > #Test1.inbound=yes > > > #Test1.outbound=yes > > > #gateway.2=Test2, TestGateway > > > #Test2.inbound=no > > > #Test2.outbound=yes > > > #gateway.3=Test3, TestGateway > > > #Test3.inbound=no > > > #Test3.outbound=yes > > > #gateway.4=Test4, TestGateway > > > #Test4.inbound=no > > > #Test4.outbound=yes > > > #gateway.5=Test5, TestGateway > > > #Test5.inbound=no > > > #Test5.outbound=yes > > > #gateway.6=Test6, TestGateway > > > #Test6.inbound=no > > > #Test6.outbound=yes > > > #gateway.7=Test7, TestGateway > > > #Test7.inbound=no > > > #Test7.outbound=yes > > > #gateway.8=Test8, TestGateway > > > #Test8.inbound=no > > > #Test8.outbound=yes > > > > # Here is an example of a Microsoft SQL Server database interface. > > > #interface.0=db1, Database > > > #db1.url=jdbc:sqlserver://localhost: > > > 1433;SelectMethod=cursor;DatabaseName=smslib > > > #db1.driver=com.microsoft.sqlserver.jdbc.SQLServerDriver > > > #db1.username=smslib > > > #db1.password=smslib > > > #db1.type=mssql > > > #db1.tables.sms_in= > > > #db1.tables.sms_out= > > > #db1.tables.calls= > > > #db1.batch_size=50 > > > #db1.retries=2 > > > #db1.update_outbound_on_statusreport=no > > > > # Here is an example of an Oracle database interface. > > > #interface.0=db1, Database > > > #db1.url=jdbc:oracle:thin:smslib/sms...@localhost:1521/XE > > > #db1.driver=oracle.jdbc.OracleDriver > > > #db1.username=smslib > > > #db1.password=smslib > > > #db1.type=oracle > > > #db1.tables.sms_in= > > > #db1.tables.sms_out= > > > #db1.tables.calls= > > > #db1.batch_size=50 > > > #db1.retries=2 > > > #db1.update_outbound_on_statusreport=no > > > > # Here is an example of a MySQL database interface. > > > interface.0=db1, Database > > > db1.type=mysql > > > db1.url=jdbc:mysql://localhost:3306/mydb?autoReconnect=true > > > db1.driver=com.mysql.jdbc.Driver > > > db1.username=root > > > db1.password='' > > > db1.tables.sms_in=smsserver_in > > > db1.tables.sms_out=smsserver_out > > > db1.tables.calls=smsserver_calls > > > db1.batch_size=50 > > > db1.retries=2 > > > db1.update_outbound_on_statusreport=no > > > > # Here is an example of a SimpleInboundFileLogger interface. > > > interface.1=file1, SimpleInboundFileLogger, inbound > > > #file1.filename=f:/logger.txt > > > > # Here is an example of a XML interface. > > > #interface.2=xml1, Xml, outbound > > > #xml1.in=c:/temp/in > > > #xml1.out=c:/temp/out > > > > # Here is an example of a JMX interface. > > > #interface.3=jmx1, Jmx > > > #jmx1.registry_port=1988 > > > #jmx1.url=service:jmx:rmi:///jndi/rmi://localhost:1988/SMSlib > > > #jmx1.object_name=org.smslib:name=SMSServer > > > > # Here is an example of a Email interface. > > > #interface.4=email1, Email > > > #email1.mailbox_protocol=pop3 > > > #email1.mailbox_host=host > > > #email1.mailbox_port=110 > > > #email1.mailbox_user=user > > > #email1.mailbox_password=password > > > #email1.mailbox_name=INBOX > > > #[email protected] > > > #[email protected] > > > #email1.smtp_host=host > > > #email1.smtp_port=25 > > > #email1.smtp_user=user > > > #email1.smtp_password=password > > > #email1.message_subject=SMS from %originator% > > > #email1.message_body=emailbody.html.tpl > > > > # Here is an example of a HTTP interface. > > > #interface.5=http1, Http > > > #http1.get_url=http://192.168.1.1/test.php?gatewayId=%gatewayId%&text= > > > %text%&originator=%originator% > > > #http1.dlr_url=http://192.168.1.1/dlr.php?gatewayId=%gatewayId%&text= > > > %text%&from=%from%&refNo=%refNo% > > > #http1.method=GET > > > > #interface.6=httpServer, HttpServer > > > #httpServer.port=8080 > > > #httpServer.password.read=0000 > > > #httpServer.password.send=1111 > > > > #Interval for processing inbound messages (in seconds) > > > settings.inbound_interval=600 > > > #Interval for processing outbound queues (in seconds) > > > settings.outbound_interval=10 > > > > #After reading, should SMSServer delete the processed messages from > > > the gateways? > > > #Default is "no" for safety. Set to "yes" if you wish to delete > > > messages. > > > #If you leave it to "no", SMSServer will process the same messages > > > over and over again! > > > settings.delete_after_processing=yes > > > > # Should SMSServer work in sync or async sending mode? > > > # Async mode forwards messages to gateway queues. > > > # Values can be "sync" and "async". > > > settings.send_mode = async > > > > # Allowed dispatch time-fames per priority > > > settings.timeframe.low=0900-2200 > > > settings.timeframe.normal=0000-2359 > > > settings.timeframe.high=0000-2359 > > > *************************************************************************** > > ***************************************************************** > > > > On Sep 3, 11:09 pm, Thanasis <[email protected]> wrote: > > > > > Check that you have correctly defined your gateways in the > > > > SMSServer.conf file. > > > > > On Sep 3, 2:51 pm, Raza <[email protected]> wrote: > > > > > > My sending and receeiving examples are running perfectly but > > > > > > when i run " sms server.java" i got the > > > > > following error > > > > > > SMSLib API version: 3.4.2 > > > > > SMSServer version: 3.4.2 > > > > > log4j:WARN No appenders could be found for logger (smslib). > > > > > log4j:WARN Please initialize the log4j system properly. > > > > > java.lang.NullPointerException > > > > > at org.smslib.AGateway.stopGateway(AGateway.java:312) > > > > > at > > org.smslib.modem.ModemGateway.stopGateway(ModemGateway.java:168) > > > > > at org.smslib.Service.stopService(Service.java:327) > > > > > at > > org.smslib.smsserver.SMSServer$Shutdown.run(SMSServer.java:110) > > > > > > Any kind of help/suggestions will be appreciated.- Hide quoted text - > > > > > - Show quoted text - > > -- > Regards, > Syed Raza Ali > FAST-NUCES --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib for Java User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/smslib?hl=en -~----------~----~----~----~------~----~------~--~---
