Ok. On Sat, Oct 10, 2009 at 3:51 PM, Pietro <[email protected]> wrote:
> > Ok, thanks. My config file is the same, but the phone appear to be the > problem. > > Pietro > > On Oct 11, 12:39 pm, Mauricio Tabares <[email protected]> wrote: > > Yes in asynx mode works fine. > > > > *Let me show you a snnipet of my config file.* > > > > gateway.0=modem1, SerialModem > > modem1.port=/dev/ttyACM0 > > modem1.baudrate=57600 > > modem1.manufacturer=SonyEricsson > > modem1.model=K550 > > modem1.protocol=PDU > > modem1.pin=0000 > > modem1.inbound=yes > > modem1.outbound=yes > > modem1.smsc_number= > > modem1.init_string=ATZ\rATZ\rATZ\r > > > > ....... > > > > #After reading, should SMSServer delete the processed messages from the > > gateways? > > #Default is "no" for safety. Set to "yes" if you wish to delete messages. > > #If you leave it to "no", SMSServer will process the same messages over > and > > over again! > > settings.delete_after_processing=yes > > > > # Should SMSServer work in sync or async sending mode? > > # Async mode forwards messages to gateway queues. > > # Values can be "sync" and "async". > > settings.send_mode=async > > > > # Allowed dispatch time-fames per priority > > settings.timeframe.low=0900-2200 > > settings.timeframe.normal=0000-2359 > > settings.timeframe.high=0000-2359 > > > > > > > > On Fri, Oct 9, 2009 at 11:54 PM, Pietro <[email protected]> wrote: > > > > > Thanks Mauricio. But did you try to use that phone in async mode with > > > smsserver?. It worked fine?. > > > > > My goal it to process the messages in the fastest possible way. > > > > > Mientras mas rapido, es mejor. Por eso estoy interesado en teléfonos > > > específicos. ;). > > > > > Saludos. > > > > > Pietro > > > > > On Oct 9, 2:37 pm, Mauricio Tabares <[email protected]> wrote: > > > > Sony Ericsson Model: K550i works fine. > > > > > > On Wed, Oct 7, 2009 at 4:24 PM, Pietro <[email protected]> wrote: > > > > > > > Thanks for your response. > > > > > > > Then someone knows a good phone that works with smslib and can be > used > > > > > in async mode with smsserver? > > > > > > > Pietro > > > > > > > On Oct 3, 2:38 am, Alam Sher <[email protected]> wrote: > > > > > > I have used Motorola V3 to receive messages in async fashion but > not > > > to > > > > > send > > > > > > them. Secondly Motorola V3 also causes issues when it comes to > send > > > > > messages > > > > > > using Source and Destination ports set to non default port > values. > > > > > > > > - Alam Sher > > > > > > > > On Fri, Oct 2, 2009 at 12:19 PM, Pietro <[email protected]> > wrote: > > > > > > > > > I am using an SE K850i phone, the only problem is that phome > does > > > not > > > > > > > appear to support sending in async mode when used with > smsserver. I > > > > > > > have to put a low value (5 seconds) sending in synchronous mode > > > > > > > because my appication must to be responsive. The message number > in > > > the > > > > > > > other side is not high. > > > > > > > > > I have a chance to purchase a Motorola V3 phone, but will be > nice > > > if > > > > > > > someone knows if that phone supports sending in async mode and > > > receive > > > > > > > in async mode too with smsserver. > > > > > > > > > What phone fit better with smslib? > > > > > > > > > Thanks in Advance > > > > > > > > -- > > > > > > Regards, > > > > > > ________________ > > > > > > Alam Sher Khan > > > > > > +92 323 533 0994 > > > > > > +92 331 505 5549 > > > > > > +92 31a lam sher > > > > > > -- > > > > Cordial Saludo, > > > > > > Edwin Mauricio Tabares Henao > > > > -- > > Cordial Saludo, > > > > Edwin Mauricio Tabares Henao > > > -- Cordial Saludo, Edwin Mauricio Tabares Henao --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib for Java User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/smslib?hl=en -~----------~----~----~----~------~----~------~--~---
