Thanks Gaurav, After more testing, I've also managed to use SMSlib with a USB cable (also standard usb drivers that come with Kies), but I still can't find any way to connect to SGS2 with bluetooth. There is no specific Samsung driver for Windows 7 bluetooth (that I can find - Kies even has a message when you try to connect to your phone via bluetooth to say that it doesn't support bluetooth connections to Android phones which is pretty shocking!). You can use a generic windows "standard serial over bluetooth link" as the driver for the bluetooth but it SMSlib service can't connect using the serial port (simple file transfer is about the only thing it can do via bluetooth). I don't think there's going to be a solution but if anyone comes up with one, please post it here.
By the way, I'm working on a computer program to allow people with physical disabilities to use SMS, email, speech generation using a modified tablet computer. http://www.aacireland.com/ Thanks again, Brian On May 29, 1:51 pm, Gaurav Malhotra <[email protected]> wrote: > Brian, > > I am using windows 7 but i am connecting to my SGSII using the > datacable. I havent tried the bluetooth though. I would try to connect > using bluetooth and see if i can use smslib > > When i installed the Samsung Kies software , it also installed the > Samsung USB driver for mobile phones. maybe the kies package also has > some drivers for bluetooth. > > I will post back after i try the bluetooth route. > > Thanks > Gaurav > > On Mon, May 28, 2012 at 8:24 PM, Brian O Carroll <[email protected]> wrote: > > > > > > > > > Hello Guarav, > > > Can you tell me: > > 1. Are you using Windows 7? > > 2 If so, how did you connect your SGSII via bluetooth. > > > I know it sounds like a stupid question but a lot of people (including > > myself) seem to have trouble with SGSII bluetooth setup on Windows 7. > > I have SMSlib working with an old Nokia phone but can't get it working > > with the I9100. It seems to be missing drivers required to communicate > > using bluetooth and from Googling it, those drivers don't seem to be > > available for Windows 7. > > > Thanks, > > Brian, Dublin > > > On May 10, 12:14 pm, Gaurav <[email protected]> wrote: > >> Hi , You could replace the below line in the example to connect to agalaxy > >> s2. > > >> SerialModemGateway gateway = new SerialModemGateway("modem.com7", "COM7", > >> 230400, "Samsung", "I9100"); > > >> I was able to run all examples with the above change. Need to add I9100 to > >> the list of compatible phones. > > >> On Thursday, February 23, 2012 7:58:40 PM UTC+5:30, Greg wrote: > > >> > Hello everyone, > > >> > We actually have some problems to read the messages sent on our > >> > gateway (a SamsungGalaxyS2). The issue is that the device doesn't > >> > appear to respond when we run the ReadMessages class (found in the > >> > examples in the documentation, modified for our gateway of course). > >> > Here is the debug log after we run it : > > >> > 52108 2012-02-23 15:13:39,610 [Thread-3] DEBUG > >> > org.smslib.modem.AModemDriver - GTW: my modem: Buffer contents on > >> > timeout: > >> > 52108 2012-02-23 15:13:39,610 [KeepAlive [my modem]] DEBUG > >> > org.smslib.threading.AServiceThread - Stopped. > >> > 52108 2012-02-23 15:13:39,610 [CNMIEmulatorProcessor [my modem]] > >> > DEBUG org.smslib.threading.AServiceThread - Stopped. > >> > 52108 2012-02-23 15:13:39,610 [SMSLib-AsyncNotifier : my modem] DEBUG > >> > org.smslib.modem.AModemDriver$AsyncNotifier - GTW: my modem: > >> > AsyncNotifier thread ended. > >> > 52109 2012-02-23 15:13:39,611 [SMSLib-AsyncMessageProcessor : my > >> > modem] DEBUG org.smslib.modem.AModemDriver$AsyncMessageProcessor - > >> > GTW: my modem: AsyncMessageProcessor thread ended. > >> > 52109 2012-02-23 15:13:39,611 [SMSlib-ModemReader-my modem] DEBUG > >> > org.smslib.modem.AModemDriver$ModemReader - GTW: my modem: > >> > ModemReader thread ended. > >> > 52109 2012-02-23 15:13:39,611 [PortReader() [/dev/ttyS0]] DEBUG > >> > org.smslib.threading.AServiceThread - Stopped. > >> > 52112 2012-02-23 15:13:39,614 [Thread-3] INFO > >> > org.smslib.modem.SerialModemDriver - GTW: my modem: Closing: /dev/ > >> > ttyS0 @115200 > >> > >>> Gateway Status change for my modem, OLD: STOPPED -> NEW: RESTART > >> > 53030 2012-02-23 15:13:40,532 [NotifyQueueManager] DEBUG > >> > org.smslib.notify.NotifyQueueManager$NotificationQueueManager - > >> > NotifyQueueManager end... > >> > 53030 2012-02-23 15:13:40,532 [DelayQueueManager] DEBUG > >> > org.smslib.queues.AbstractQueueManager$DelayQueueManager - > >> > DelayQueueManager end... > >> > 53130 2012-02-23 15:13:40,632 [NotifyQueueManager] DEBUG > >> > org.smslib.threading.AServiceThread - Running... > >> > 53130 2012-02-23 15:13:40,632 [NotifyQueueManager] DEBUG > >> > org.smslib.notify.NotifyQueueManager$NotificationQueueManager - > >> > NotifyQueueManager running... > >> > 53231 2012-02-23 15:13:40,733 [WatchDog] DEBUG > >> > org.smslib.threading.AServiceThread - Stopped. > >> > 53231 2012-02-23 15:13:40,733 [main] INFO > >> > org.smslib.modem.ModemGateway - GTW: my modem: Stopping gateway... > >> > >>> Gateway Status change for my modem, OLD: RESTART -> NEW: STOPPING > >> > 53231 2012-02-23 15:13:40,733 [NotifyQueueManager] DEBUG > >> > org.smslib.notify.NotifyQueueManager$NotificationQueueManager - > >> > NotifyQueueManager end... > >> > 53231 2012-02-23 15:13:40,733 [main] INFO > >> > org.smslib.modem.SerialModemDriver - GTW: my modem: Closing: /dev/ > >> > ttyS0 @115200 > >> > 53231 2012-02-23 15:13:40,733 [main] INFO > >> > org.smslib.modem.ModemGateway - GTW: my modem: Gateway stopped. > >> > 53331 2012-02-23 15:13:40,833 [NotifyQueueManager] DEBUG > >> > org.smslib.threading.AServiceThread - Running... > >> > 53332 2012-02-23 15:13:40,834 [NotifyQueueManager] DEBUG > >> > org.smslib.notify.NotifyQueueManager$NotificationQueueManager - > >> > NotifyQueueManager running... > >> > >>> Gateway Status change for my modem, OLD: STOPPING -> NEW: STOPPED > >> > 53332 2012-02-23 15:13:40,834 [NotifyQueueManager] DEBUG > >> > org.smslib.notify.NotifyQueueManager$NotificationQueueManager - > >> > NotifyQueueManager end... > >> > 53432 2012-02-23 15:13:40,934 [NotifyQueueManager] DEBUG > >> > org.smslib.threading.AServiceThread - Stopped. > >> > org.smslib.TimeoutException: No response from device.53433 2012-02-23 > >> > 15:13:40,935 [main] INFO org.smslib.modem.ModemGateway - GTW: my > >> > modem: Stopping gateway... > >> > 53433 2012-02-23 15:13:40,935 [main] INFO > >> > org.smslib.modem.SerialModemDriver - GTW: my modem: Closing: /dev/ > >> > ttyS0 @115200 > >> > 53433 2012-02-23 15:13:40,935 [main] INFO > >> > org.smslib.modem.ModemGateway - GTW: my modem: Gateway stopped. > > >> > A step by step debug showed that the function > >> > Service.getInstance().startService(); never finish and thus a timeout > >> > error appears. > >> > The weird thing is that the SendMessages class works great (we are > >> > able to send messages with it by using the -Dsmslib.serial.polling and > >> > -Djava.library.path=[...] arguments as we run it) and the code to > >> > connect the gateway seems to be the same as the one in the > >> > ReadMessages. Plus, the CommTest finds our gateway (not for all > >> > baudrates but we are using one of the baudrates that is working with > >> > CommTest)... > > >> > Does someone have an idea of what is the issue here ? We installed the > >> > RxTx library instead of the JavaComm one, can it be a problem ? > > >> > Thank you for your help. > > > -- > > You received this message because you are subscribed to the Google Groups > > "SMSLib Discussion Group" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group > > athttp://groups.google.com/group/smslib?hl=en. -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
