Folks, Further to my original post I contacted Bowers % Wilkins who offered the advice below ======= This resolved my issue. Just in case anyone else has it.
Kind regards, Steve. ================================================================================================= Please could you unplug the Zeppelin Air from the mains until the LED turns off. Please then plug the Zeppelin Air back in. The LED will start to pulse red, this is the startup procedure and should take no more the 1 minute. After this your Zeppelin Air's LED should change to double flashing yellow, flashing purple or solid purple. Please could you confirm what LED colour it changes to? The double flashing yellow can sometimes look green which may be the reason you saw a flashing green LED. This colour LED indicates that your Zeppelin Air needs to be setup to your wireless router. You get this LED colour after you have reset the Zeppelin Air. If the LED is flashing yellow please go to the settings on your iPhone, Then Wifi, you should see that there is a wireless network called 'Zeppelin Air Setup' Please connect to this network and ensure a tick is next to the network name. Please then go through the setup process on the Bowers & Wilkins Control App and see if you can successfully connect your Zeppelin Air to your network. On 25 Oct 2015, at 16:19, Davies Steve <[email protected]> wrote: My wife and I both have iPhone 5s’s which we used to connect to our zeppelin air and Bowers &Wilkins A5 speakers using Airplay However, recently neither of us can connect via Airlrplay, both phones can detect the A5 speaker and Apple TV but the zeppelin is no longer showing up? Not sure exactly how long the issue has been there as we do not do this a great deal but perhaps it’s since updating the phones to IOS 9 / 9.1? I have tried resetting the zeppelin and have installed the latest firmware but to no avail. The iPhone will connect to the zeppelin via the 30 pin connector dock using the 30 pin to Lightening connector Interestingly my iMac can see and connect to all the remote speakers and Apple TV Any ideas, Steve. -- You received this message because you are subscribed to the Google Groups "Sussex Mac User Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. Visit this group at http://groups.google.com/group/smug. For more options, visit https://groups.google.com/d/optout.
