Hello Steve,
Normally these files should come and go quickly.
It's possible that when you reinstalled mxGuard something became
confused or improperly configured.
Stop processing messages.
Clean out any .QUE, .WRK, .XXX, .FIN, .ABT, and .LOCK files in the SNF
directory.
Make sure your persistent instance is running correctly. One good way
to do this is to type the .stat file created by the persistent
instance every few seconds. The tictock value should change indicating
that the file is being updated by your persistent instance.
Start processing messages again.
If SNF and the persistent instance are not stopped cleanly then
leftover job files can cause some confusion that results in poor
performance and/or large numbers of .QUE and other job files to build
up. Clearing them out and restarting often solves this problem if
nothing else has been changed/broken.
Hope this helps,
Thanks,
_M
Friday, July 14, 2006, 4:39:09 PM, you wrote:
I just started getting a bunch of que files in my sniffer dir today after a reinstall of MXGuard
Ref:
agseap2t-20060714203613x5756511A-5032.QUE
Any idea how to stop these or why they are popping up?
I use sniffer as a persistent instance but maybe it's not working
so these are the hooks that should be firing off the linked files for sniffer review??
Regards,
Steve Guluk
SGDesign
(949) 661-9333
ICQ: 7230769
--
Pete McNeil
Chief Scientist,
Arm Research Labs, LLC.
#############################################################
This message is sent to you because you are subscribed to