Stay on the list please,
Follow my answer. Check the last OID returned and see if it is still
within your desired range, and if not, create another getBulk PDU
starting with that OID and some MAX-REPETITIONS, and repeat until you
get all you need.
Phil
________________________________
From: Julio Martins [mailto:[EMAIL PROTECTED]
Sent: Saturday, June 14, 2008 1:58 PM
To: PHIL BERGSTRESSER
Subject: Re: [SNMP4J] Help - GETBULK
Phil, what I can do for solve this problem? What are your
sugetion?
Julio
On 6/13/08, PHIL BERGSTRESSER <[EMAIL PROTECTED]>
wrote:
Sure Julio,
The agent puts as many results as it thinks it has
room to do, and
sends what it can. It's up to you to request more if you
didn't get all.
Like a getNext, it's up to you to decide if you have
gone past the OIDs
you are walking. Each Get PDU of any kind will return
one response PDU.
You keep it going until you have enough. The advantage
of the GetBulk in
SNMPv2 is that it only takes one get PDU to get a lot of
returns in one
response.
HTH,
Phil
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Julio
Martins
> Sent: Friday, June 13, 2008 2:28 PM
> To: [email protected]
> Subject: [SNMP4J] Help - GETBULK
>
> Hi! My name is Julio. I'm Brazilian guy and have a
problem
> with SNMP4J GETBULK operation.
>
> I tested in SNMP4J tool this comand line: SNMP4J -p
GETBULK
> -v 2c -c SENHA
> 172.30.0.49 "1.3.6.1.4.1.1916.1.2.8.1.1.1"
>
> This OID is a OID of Extreme Switch. This returns
vlans of
> the equipament, but this equipament has about 1000
vlans and
> this command returns only 10 lines.
>
> Anyone have idea about this problem?
>
> Thanks
>
>
> Julio
> _______________________________________________
> SNMP4J mailing list
> [email protected]
> http://lists.agentpp.org/mailman/listinfo/snmp4j
>
_______________________________________________
SNMP4J mailing list
[email protected]
http://lists.agentpp.org/mailman/listinfo/snmp4j
