Hi, The value is not set, because there was an error! The error status is wrongValue(10). So you will have to specify a valid value to get this working.
Best regards, Frank wafae alami wrote: > Hi everyone , > > please how sould I use the snmp4j console tool to set a new value for > an attribute of a Table Mbean . > > the OID of the table entry is : 1.3.6.1.4.1.637.71.6.161.1 > the OID of the attribute is : 1.3.6.1.4.1.637.71.6.161.1.3 > > and the command i use is : > > ./SNMP4J-linux -c public -v 2c -p SET udp:127.0.0.1/8001 > <http://127.0.0.1/8001> "1.3.6.1.4.1.637.71.6.161.1.3.1={i}2" > > 21 juil. 2009 15:00:40 org.snmp4j.log.JavaLogAdapter log > INFO: UDP receive buffer size for socket 135.183.166.201/0 > <http://135.183.166.201/0> is set to: 56320 > Received response after 56 millis > Response received with requestID=954986960, errorIndex=1, > errorStatus=Wrong value(10) > 1.3.6.1.4.1.637.71.6.161.1.3.1 = 2 > > but the value is not set. > > please if someone have an idea about the issue . > > thanks in advance . > Ouafae. -- AGENT++ http://www.agentpp.com http://www.snmp4j.com http://www.mibexplorer.com http://www.mibdesigner.com _______________________________________________ SNMP4J mailing list [email protected] http://lists.agentpp.org/mailman/listinfo/snmp4j
