Hello,
I'm sorry that I didn't provide any further information for the problem.
This is what I captured with Wireshakr for one set-request which successfully
set the property
on the network component:
No. Time Source Destination Protocol
Length Info
41 5.404718000 10.2.1.21 10.2.1.240 SNMP 195
set-request 1.3.6.1.4.1.9.9.513.1.7.4.1.1.12.104.3.3.149.208
Frame 41: 195 bytes on wire (1560 bits), 195 bytes captured (1560 bits) on
interface 0
Ethernet II, Src: WistronI_97:0f:b7 (3c:97:0e:97:0f:b7), Dst: CiscoInc_e0:60:05
(e0:ac:f1:e0:60:05)
Internet Protocol Version 4, Src: 10.2.1.21 (10.2.1.21), Dst: 10.2.1.240
(10.2.1.240)
User Datagram Protocol, Src Port: 65210 (65210), Dst Port: 161 (161)
Simple Network Management Protocol
msgVersion: snmpv3 (3)
msgGlobalData
msgID: 1237400771
msgMaxSize: 65535
msgFlags: 07
.... .1.. = Reportable: Set
.... ..1. = Encrypted: Set
.... ...1 = Authenticated: Set
msgSecurityModel: USM (3)
msgAuthoritativeEngineID: 00003763000060006406a8c0
0... .... = Engine ID Conformance: RFC1910 (Non-SNMPv3)
Engine Enterprise ID: Airespace, Inc (formerly 'Black Storm Networks')
(14179)
AgentID Trailer: 0x000060006406a8c0
msgAuthoritativeEngineBoots: 1
msgAuthoritativeEngineTime: 1952429
msgUserName: SecTestUser
msgAuthenticationParameters: 4739f56e8828a1b8857127d4
[Authentication: OK]
[Expert Info (Chat/Checksum): SNMP Authentication OK]
[SNMP Authentication OK]
[Severity level: Chat]
[Group: Checksum]
msgPrivacyParameters: 53d380fb215c5e78
msgData: encryptedPDU (1)
encryptedPDU: 95d0aa3fcf935f4ba649678b9d81fee6912d0b1fe93e8e4c...
Decrypted ScopedPDU:
303d040c00003763000060006406a8c00400a32b0204164d...
contextEngineID: 00003763000060006406a8c0
0... .... = Engine ID Conformance: RFC1910 (Non-SNMPv3)
Engine Enterprise ID: Airespace, Inc (formerly 'Black Storm
Networks') (14179)
AgentID Trailer: 0x000060006406a8c0
contextName:
data: set-request (3)
set-request
request-id: 374145296
error-status: noError (0)
error-index: 0
variable-bindings: 1 item
1.3.6.1.4.1.9.9.513.1.7.4.1.1.12.104.3.3.149.208:
Object Name:
1.3.6.1.4.1.9.9.513.1.7.4.1.1.12.104.3.3.149.208
(iso.3.6.1.4.1.9.9.513.1.7.4.1.1.12.104.3.3.149.208)
Value (Integer32): 2
No. Time Source Destination Protocol
Length Info
42 5.405533000 10.2.1.240 10.2.1.21 SNMP 194
get-response 1.3.6.1.4.1.9.9.513.1.7.4.1.1.12.104.3.3.149.208
Frame 42: 194 bytes on wire (1552 bits), 194 bytes captured (1552 bits) on
interface 0
Ethernet II, Src: CiscoInc_e0:60:00 (e0:ac:f1:e0:60:00), Dst: WistronI_97:0f:b7
(3c:97:0e:97:0f:b7)
Internet Protocol Version 4, Src: 10.2.1.240 (10.2.1.240), Dst: 10.2.1.21
(10.2.1.21)
User Datagram Protocol, Src Port: 161 (161), Dst Port: 65210 (65210)
Simple Network Management Protocol
msgVersion: snmpv3 (3)
msgGlobalData
msgID: 1237400771
msgMaxSize: 4096
msgFlags: 03
.... .0.. = Reportable: Not set
.... ..1. = Encrypted: Set
.... ...1 = Authenticated: Set
msgSecurityModel: USM (3)
msgAuthoritativeEngineID: 00003763000060006406a8c0
0... .... = Engine ID Conformance: RFC1910 (Non-SNMPv3)
Engine Enterprise ID: Airespace, Inc (formerly 'Black Storm Networks')
(14179)
AgentID Trailer: 0x000060006406a8c0
msgAuthoritativeEngineBoots: 1
msgAuthoritativeEngineTime: 1952429
msgUserName: SecTestUser
msgAuthenticationParameters: 6c42ce550b043adda25bb7cb
[Authentication: OK]
[Expert Info (Chat/Checksum): SNMP Authentication OK]
[SNMP Authentication OK]
[Severity level: Chat]
[Group: Checksum]
msgPrivacyParameters: a022f203000000b8
msgData: encryptedPDU (1)
encryptedPDU: dd04f0158d06e1337c7f3a69a56d4c423794a0099c8998c5...
Decrypted ScopedPDU:
303d040c00003763000060006406a8c00400a22b0204164d...
contextEngineID: 00003763000060006406a8c0
0... .... = Engine ID Conformance: RFC1910 (Non-SNMPv3)
Engine Enterprise ID: Airespace, Inc (formerly 'Black Storm
Networks') (14179)
AgentID Trailer: 0x000060006406a8c0
contextName:
data: get-response (2)
get-response
The request is sent like this:
ResponseEvent response = snmp.set(pdu, target);
The ResponseEvent is not empty, but when I try to get the PDU via
response.getResponse() it is null.
And I need to evaluate the response to tell the user, if it was successful or
not.
The ID seems to be ok.
Thanks for your help in advance.
Best regards,
Daniel
-----Ursprüngliche Nachricht-----
Von: SNMP4J [mailto:[email protected]] Im Auftrag von Jochen Katz
Gesendet: Montag, 14. Dezember 2015 18:59
An: [email protected]
Betreff: Re: [SNMP4J] Empty SNMP Packets send to Agent
Hello,
> Now I have another problem. I do some set requests and the values are
> set successfully, but the response parameter of the ResponseEvent is
> always null.
>
> What could be the problem there? In Wireshark I can see the response
> with all necessary informations about the successful action.
without some log information it is difficult to find the cause of this.
Either the response cannot be matched to request (SNMPv3 message id does not
match) or the response contains wrong or none SNMPv3 time information or
something completely different.
Regards,
Jochen
_______________________________________________
SNMP4J mailing list
[email protected]
https://oosnmp.net/mailman/listinfo/snmp4j
_______________________________________________
SNMP4J mailing list
[email protected]
https://oosnmp.net/mailman/listinfo/snmp4j
