Kris; Polyurethene glues have been used for several years in the construction of Balsa sheeted foam wings on up to 40% scale aerobatic aircraft. I have used it to sheet the wings of my Pegasus tow planes. I would not use it with Obeche as it is too porous and the glue expands as it cures. Obeche is too thin and open grained to resist the subsequent bleed through. I have used it with 1/32 poplar veneer with success. This glue uses ambient moisture in the air and in the wood you are gluing to cure. It will cure in a vacum bag, I have done it. It is light strong and a little less toxic than epoxy, but not cheaper. do not use the thickened variety found in some stores. Excel is one brand name that works well. John Derstine E-mail; [EMAIL PROTECTED] Scale Soaring: http://www.Geocities.com/~scalesoar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, April 24, 2000 2:19 PM To: [EMAIL PROTECTED] Subject: [RCSE] Polyurethane glues I am curious if anyone out there is using any of the polyurethane glues. I recently purchased some for a home project. I have been playing with and it seems to hold promise. Its cheaper than epoxy, and I have read it has less toxicity (shouldn't be hard!). It appears to be foam safe. Might be a good glue for foam wings; the foaming action as it cures should create a very strong light bond. Anybody know if it will cure in a vacuum bag? Any body else been using this glue? Kristopher RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
