Jimmy:
True about the mix ratios. From my experience Fumed Silica tends to make the
resulting mix very hard when cured. Too hard means brittle so watch that
aspect. I use  Fiberlays's Pro-Glass now, 4-1 mix, three types of hardener
are available. I use the 1314/3102 for glue, fast settup and cool weather
laminating, and the 1314/3156 for warm weather use. The Fiberlay,
FibreGlast, and West websites have how tos and property info.
http://www.fiberlay.com/Pages/epoxy.html

FibreGlast website, another good supplier, for East coast guys:
> http://www.fibreglast.com/






Message-----
From: Jimmy D. Andrews [mailto:[EMAIL PROTECTED]]
Sent: Saturday, November 04, 2000 4:18 AM
To: RCSE
Subject: [RCSE] Which Epoxy - Was Micro balloons?


What brand of Epoxy does everyone use?  MGS?  West Systems?  Pacer?

Is there a good explanation of epoxies, as used by us, on the web?

I have heard that epoxies with a 1:1 mix ratio have one part diluted by
something, and that this something may decrease strength.  I have also
noticed that the epoxies used by the glider makers are generally harder,
but this may be due to applying heat during the cure stage.

Jimmy
-------------------------------

John Derstine wrote:
>

>
> FibreGlast website, another good supplier, for East coast guys:
> http://www.fibreglast.com/
> Comprehensive list of resources: http://www.advmat.com/links.html
>
>

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to