On Thu, 30 Aug 2001 17:17:42 -0700, you wrote:

>At 06:12 PM 8/30/2001 -0400, SilentFlight wrote:
>>Cool-- I was beginning to think I was just a cheap bastard....
>
>> > I've been re-sharpening my blades for about a year now.  It's quicker
>> > than changing 'em, and they sharpen keener than new.
>> >
>> > A 2x6 fine stone sits at the edge of my bench.  Very convenient and no
>> > groping thru the rubble for it...
>
>Some years ago I found a neat sharpening device.  Nice chunk of wood with a 
>couple of holes in it drilled at an angle.  Round stones are inserted into 
>the holes and are held in a V shape.  You stroke the blade  down one side 
>and then the other.  You've probably seen these.  The trick is to get 
>different grade stones.  The unit I use for x-acto blades looks like a 
>marble or very fine porcelain in texture.  Very hard, probably aluminum 
>oxide.  I can put as keen an edge on a blade as they came with.   I have a 
>whole set of these sharpening stones in various textures for anything to 
>sharpening an ax to X-acto blades.
>
>It's not so much cheap as quick.
>
>Cheers,
>
>Bill


I find the best is 600 to 1200 wet or dry silicon carbide sand paper
followed by stropping with white buffing compound on leather 

by the way keep in mind where the blade will end up when it slips. I
was enlarging a hole in a plastic box tonight and slipped, right in to
my wrist 5 stitches and lots of blood.


Jay
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to