After the trauma of last week, I have been going out after work this week and test flying the new EMS Sperber. It has been an opportunity to relax and get some soaring in during a rather hectic work week for me. I set out to experiment with several prop combinations after talking to a few people on and off various lists here on the web. The Sperber is, for those not familiar, a 4.5 meter non scale electric soaring machine. This aircraft has proven to be one of the most enjoyable sailplanes I have ever flown. It has an L/D that is unparallelled. This completely belies its weight of 15.5 pounds. It floats on on the light twilight breezes of Northern PA as if there were a string holding her to the sky. It just keeps going. As the sun set tonight I found myself still circling lazily around the sky. I tried some tight circles for the heck of it and discovered that this plane will do very small thermal turns without losing any altitude. 15' diameter turns. The polyhedral wing and winglets combined with the flapped full span trailing edge make for a wide speed range. with the new HQW airfoils it performs wonderfully with camber, normal, and reflexed settings. The motor I use is an old Keller 736/5 with 20 cells and either a 13/7 Graupner Cam prop (fast take offs and three climbs to altitude)or a Freudenthaler carbon 13.5/7 for slower take offs but very steep climb outs. I have experimented with a cart we used to use for aerotowing and found this to be a no risk, no arm burning way to acomplish take offs. I have a smaller version of this plane (Albatross) due in next week. I cant wait to try this one out as well. I have one picture on my web page now and hope to get a few more up in a week or so. Happy soaring, and may we all get a chance to enjoy a little flying before the winter weather sets in(at least in the Northeast) Regards, John Derstine Endless Mountain Models note new email address E-mail; [EMAIL PROTECTED] Web Page: http://www.geocities.com/scalesoar/EMM/rand.htm RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
