----------
> From: David J. Schat <[EMAIL PROTECTED]>
> I think a better idea would be to include some pocket making supplies
with
> the RDS. How 'bout it Harley?

I had suggested that 1/2" wide strips of thin Formica be provided in the
package. However, not knowing what size aircraft might be involved and
considering that 3/8" or 3/4" widths would be more appropriate for smaller
or larger aircraft, this was deemed impractical. Also, I had suggested
commercial shim stock be provided for spacer material. However, WHAT
THICKNESS considering the variety of wire sizes that might be used? Also
who is supposed to cut this stuff the right sizes and get the edges free of
burrs, assuming we knew what the "right sizes" were? 

I had also suggested an "expandable" pocket that could be made to work on
1/32" wire, with shims in increments of 1/32" to open it to receive up to
1/8" wire. This was all deemed too costly, too complex, and impractical
considering that wire sizes that are supposed to be identical, do actually
vary enough to be unusable with a given sized opening.

Fellas. .be happy! We got a molded coupler that works! What is the big deal
about joining Formica and balsa with CA to make a pocket? Should anyone who
can't do that really be flying an RC aircraft?

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to