At 09:50 PM 9/2/1999 -0500, you wrote:
>I can't seem to get a good seam on my FG parts. I've rolled them and
>applied thickened epoxy and still I get long bubbles under the the
>glass. It happens on both sides of the seam. I'm about ready to try
>taped seams. Any tips?
>--
>Ron Richardson
>
When you do a wet on wet seam you need to taper the glass layers at the
joint line on one side so that when the glass from the other side of the joint
overlaps it it lays in smoothly. Like the first layer is right up to the edge of the
mould the second is 2mm back the third is 2mm futher back... understand?
If you don't do this you will get the overlaping layers lifting.
Eddie Smith
[EMAIL PROTECTED]
http://www.users.on.net/camtech/eddie/index.htm
ICQ 10556827
<>
Some of the world's greatest feats were accomplished by people
not smart enough to know they were impossible.
<> RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
